Skip to the content
2 layers51.1 × 104.8 mmPicoDSO, the printed circuit board in 3D

Oscilloscope based on the Raspberry Pi Pico

Size
51.1 × 104.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
56
Pads
424
Tracks, vias
693, 42
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
15 Sep 2024
Updated
17 Jun 2025

Overview

PicoDSO is an open-source printed circuit board by HL65536, from the HL65536/picoDSO repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 51.1 × 104.8 mm with 60 parts on 56 nets, routed with 693 tracks and 42 vias.

Its parts include 20 resistors, 15 capacitors, 10 connectors, 7 ICs and 6 switches. It belongs with the RP2040 boards of this library.

README

README.md

picoDSO

================

Open-Source Oscilloscope based on the Raspberry Pi Pico

Project Status


The minimum viable product is ready, and development of new features is ongoing. Updates will be published regularly, although the pace may be slow.

Key Features


  • Flexible Data Acquisition: Use either the internal ADC(s) of the Raspberry Pi Pico to measure up to ~2MSa/s or 1-2 faster external ADCs (requires a custom PCB) for >50MSa/s at 8 bit.
  • Optional PCB: The project can be built on a breadboard or with an optional PCB for easier assembly and improved performance.
  • Display Options: Supports both SSD1306 and ST7789 displays, with potential support for more in the future.

Parts

60
QtyValueFootprintReferences
6100nFcustomStuff:universalMixedC4, C5, C6, C16, C17, C18
622kcustomStuff:universalMixedLongR14, R15, R17, R18, R20, R21
3100kcustomStuff:universalMixedLongR16, R19, R22
368pFcustomStuff:universalMixedC25, C26, C27
3probeConnectorConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ6, J7, J8
24.7kcustomStuff:universalMixedLongR11, R12
2470customStuff:universalMixedLongR9, R10
2ADC08060customStuff:TSSOP-24 hand solderU7, U9
2C_PolarizedcustomStuff:universalMixedElectrolyticCapC10, C22
2Cdiv_botcustomStuff:universalMixedC9, C21
2Cdiv_topcustomStuff:universalMixedC12, C24
2RcustomStuff:universalMixedLongR1, R5
2Rdiv_botcustomStuff:universalMixedLongR3, R7
2Rdiv_topcustomStuff:universalMixedLongR4, R8
2probeGNDConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ3, J5
11kcustomStuff:universalMixedLongR13
1D_SchottkycustomStuff:universalMixedDiodeD1
1JoystickSwitchcustomStuff:JoystickSwitchSW2
1PicoRPi_Pico:RPi_Pico_SMD_THU2
1SSD1306_Display1Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalU4
1SSD1306_Display2Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalU5
1ST7789Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalU3
1bat+Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ10
1bat_GNDConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ9
1buttoncustomStuff:universalButtonSW7
1chip0_probe+Connector_Wire:SolderWirePad_1x01_SMD_5x10mmJ4
1chip1_probe+Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ2
1dir1_altcustomStuff:universalButtonSW6
1dir2_altcustomStuff:universalButtonSW3
1dir3_altcustomStuff:universalButtonSW5
1dir4_altcustomStuff:universalButtonSW4
1internalADC_GNDConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ1
1internalADC_rangeselJumperConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP1
1optional_externalVREFcustomStuff:universalMixedU1

More from HL65536/picoDSO

1
  • 2 layers50.9 × 104.5 mmPicoDSO, the printed circuit board in 3D

    PicoDSO

    HL65536/picoDSO

    Oscilloscope based on the Raspberry Pi Pico

    65 partsAGPL-3.0

Similar boards

  • 2 layers35 × 50 mmGoblin, the printed circuit board in 3D

    Goblin

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    60 parts463
  • 2 layers32.9 × 119.1 mmConnector, the printed circuit board in 3D

    Connector

    thpoll83/PolyKybd

    PolyKybd

    60 parts411CERN-OHL-W-2.0
  • 2 layers35.9 × 62.7 mmRp2040-memcard, the printed circuit board in 3D

    Rp2040-memcard

    sd2psx/pcb

    The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.

    60 parts241
  • 2 layers58 × 110 mmBrain ui split pulse, the printed circuit board in 3D

    Brain ui split pulse

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    60 parts222
  • 2 layers52 × 90 mmEmu brd, the printed circuit board in 3D

    Emu brd

    rscott2049/DECstation2040

    A RP2040 based DECstation emulator

    60 parts212BSD-3-Clause
  • 2 layers42.5 × 80 mmSimplemixsmall, the printed circuit board in 3D

    Simplemixsmall

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    60 parts208
  • 2 layers57.4 × 12 mmZicada, the printed circuit board in 3D

    Zicada

    CoretechR/Zicada

    DIY Zigbee Multisensor

    60 parts205GPL-3.0
  • 2 layers87.9 × 123.9 mmBitdoglab, the printed circuit board in 3D

    Bitdoglab

    BitDogLab/BitDogLab

    Open-source educational hardware for embedded systems, programming, electronics, and physical computing.

    60 parts203

Questions

How big is the PicoDSO PCB?

It measures 51.1 × 104.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PicoDSO use?

60 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PicoDSO KiCad files?

From the HL65536/picoDSO repository on GitHub, at the commit this page was made from: the board is Hardware/picoDSO_ADC08100/picoDSO.kicad_pcb and its schematic Hardware/picoDSO_ADC08100/ADC_chip.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PicoDSO design in my own project?

Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).