Skip to the content
2 layers50.9 × 104.5 mmPicoDSO, the printed circuit board in 3D

Oscilloscope based on the Raspberry Pi Pico

Size
50.9 × 104.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
65
Nets
60
Pads
444
Tracks, vias
810, 45
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
15 Sep 2024
Updated
17 Jun 2025

Overview

PicoDSO is an open-source printed circuit board by HL65536, from the HL65536/picoDSO repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 50.9 × 104.5 mm with 65 parts on 60 nets, routed with 810 tracks and 45 vias.

It is built around the ADS830E. Its parts include 19 capacitors, 18 resistors, 10 connectors, 7 ICs and 7 switches. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md

picoDSO

================

Open-Source Oscilloscope based on the Raspberry Pi Pico

Project Status


The minimum viable product is ready, and development of new features is ongoing. Updates will be published regularly, although the pace may be slow.

Key Features


  • Flexible Data Acquisition: Use either the internal ADC(s) of the Raspberry Pi Pico to measure up to ~2MSa/s or 1-2 faster external ADCs (requires a custom PCB) for >50MSa/s at 8 bit.
  • Optional PCB: The project can be built on a breadboard or with an optional PCB for easier assembly and improved performance.
  • Display Options: Supports both SSD1306 and ST7789 displays, with potential support for more in the future.

Parts

65
QtyValueFootprintReferences
10100nFcustomStuff:universalMixedC1, C2, C3, C8, C11, C13, C14, C15, C20, C23
622kcustomStuff:universalMixedLongR14, R15, R17, R18, R20, R21
3100kcustomStuff:universalMixedLongR16, R19, R22
368pFcustomStuff:universalMixedC25, C26, C27
3probeConnectorConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ6, J7, J8
210µFcustomStuff:universalMixedElectrolyticCapC7, C19
24.7kcustomStuff:universalMixedLongR11, R12
2470customStuff:universalMixedLongR9, R10
2ADS830EcustomStuff:QSOP-20 hand solderU6, U8
2Cdiv_botcustomStuff:universalMixedC9, C21
2Cdiv_topcustomStuff:universalMixedC12, C24
2Rdiv_botcustomStuff:universalMixedLongR3, R7
2Rdiv_topcustomStuff:universalMixedLongR4, R8
2probeGNDConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ3, J5
11kcustomStuff:universalMixedLongR13
1ADS830E_0_rangeselcustomStuff:universalMixedJP2
1ADS830E_1_rangeselcustomStuff:universalMixedJP3
1ADS830E_rangeselPackage_DIP:DIP-4_W7.62mmSW1
1D_SchottkycustomStuff:universalMixedDiodeD1
1JoystickSwitchcustomStuff:JoystickSwitchSW2
1PicoRPi_Pico:RPi_Pico_SMD_THU2
1SSD1306_Display1Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalU4
1SSD1306_Display2Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalU5
1ST7789Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalU3
1bat+Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ10
1bat_GNDConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ9
1buttoncustomStuff:universalButtonSW7
1chip0_probe+Connector_Wire:SolderWirePad_1x01_SMD_5x10mmJ4
1chip1_probe+Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ2
1dir1_altcustomStuff:universalButtonSW6
1dir2_altcustomStuff:universalButtonSW3
1dir3_altcustomStuff:universalButtonSW5
1dir4_altcustomStuff:universalButtonSW4
1internalADC_GNDConnector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_ReliefJ1
1internalADC_rangeselJumperConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP1
1optional_externalVREFcustomStuff:universalMixedU1

More from HL65536/picoDSO

1
  • 2 layers51.1 × 104.8 mmPicoDSO, the printed circuit board in 3D

    PicoDSO

    HL65536/picoDSO

    Oscilloscope based on the Raspberry Pi Pico

    60 partsAGPL-3.0

Similar boards

  • 2 layers42 × 67 mmLalboard, the printed circuit board in 3D

    Lalboard

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    65 parts993
  • 2 layers198.1 × 30.5 mmSplitflap driver, the printed circuit board in 3D

    Splitflap driver

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    65 parts744MIT
  • 2 layers74.8 × 32.5 mmMooltipass mini, the printed circuit board in 3D

    Mooltipass mini

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    65 parts531
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0
  • 2 layers45 × 58.2 mmOpentama, the printed circuit board in 3D

    Opentama

    Sparkr-tech/opentama

    An open-source reference design for MCUGotchi

    65 parts237
  • 2 layers40 × 120 mmPhotodiode board v3, the printed circuit board in 3D

    Photodiode board v3

    0x23/nmWave-Interferometer

    An Open Source Interferometer for Accurate Distance Measurements

    65 parts151MIT
  • 2 layers78 × 130 mmLofence, the printed circuit board in 3D

    Lofence

    kiu/lofence

    LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

    65 parts142MIT

Questions

How big is the PicoDSO PCB?

It measures 50.9 × 104.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PicoDSO use?

65 parts, built around the ADS830E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PicoDSO KiCad files?

From the HL65536/picoDSO repository on GitHub, at the commit this page was made from: the board is Hardware/picoDSO_ADS830E/picoDSO.kicad_pcb and its schematic Hardware/picoDSO_ADC08100/ADC_chip.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PicoDSO design in my own project?

Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).