
Breakout 112pin Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit

Stylo is an open-source printed circuit board by hitriy, from the hitriy/flipper-stylophone-hw repository on GitHub, published under the MIT licence. It is a 2-layer board with 42 parts on 22 nets, routed with 135 tracks and 0 vias.
Its parts include 20 resistors and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +4 |
| 1 | 1 | stylo:Left | |
| 1 | 1,5 | stylo:Top | |
| 1 | 10 | stylo:Left | |
| 1 | 10,5 | stylo:Top | |
| 1 | 11 | stylo:Bottom | |
| 1 | 11,5 | stylo:Top | |
| 1 | 12 | stylo:Right | |
| 1 | 2 | stylo:Right | |
| 1 | 3 | stylo:Left | |
| 1 | 3,5 | stylo:Top | |
| 1 | 4 | stylo:Bottom | |
| 1 | 4,5 | stylo:Top | |
| 1 | 5 | stylo:Right | |
| 1 | 6 | stylo:Left | |
| 1 | 6,5 | stylo:Top | |
| 1 | 7 | stylo:Bottom | |
| 1 | 7,5 | stylo:Top | |
| 1 | 8 | stylo:Bottom | |
| 1 | 8,5 | stylo:Top | |
| 1 | 9 | stylo:Right | |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Stylo | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | TP21 |

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


42 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hitriy/flipper-stylophone-hw repository on GitHub, at the commit this page was made from: the board is stylo.kicad_pcb and its schematic stylo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).