2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k
2 layers53.4 × 32 mm
Jetson imu board
HighlandersFRC/electronicsVarious electronics-related projects
- Size
- 53.4 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 138
- Pads
- 174
- Tracks, vias
- 224, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Oct 2016
- Updated
- 29 Oct 2016
Overview
Jetson imu board is an open-source printed circuit board by HighlandersFRC, from the HighlandersFRC/electronics repository on GitHub. It is a 2-layer board of 53.4 × 32 mm with 12 parts on 138 nets, routed with 224 tracks and 14 vias.
It is built around the TXB0108PW. Its parts include 3 capacitors, 3 connectors, 2 resistors and 1 IC. It belongs with the sensors and measurement and computers and single-board computers boards of this library.
Main components
1README
README.mdElectronics Projects
Various electronics-related projects.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1u | Capacitors_SMD:C_1206_HandSoldering | C1, C3 |
| 2 | 10K | Resistors_SMD:R_1206_HandSoldering | R1, R2 |
| 1 | 1u | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | Address |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P4 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06 | P5 |
| 1 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | P6 |
| 1 | J3A1 | Pin_Headers:Pin_Header_Straight_2x25_Pitch2.00mm | JA31 |
| 1 | J3A2 | jetson_imu_footprints:Pin_Header_Straight_3x25_Pitch2.00mm | JA32 |
| 1 | TXB0108 | Housings_SSOP:SSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
Questions
How big is the Jetson imu board PCB?
It measures 53.4 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jetson imu board use?
12 parts, built around the TXB0108PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jetson imu board KiCad files?
From the HighlandersFRC/electronics repository on GitHub, at the commit this page was made from: the board is jetson_imu_board/jetson_imu_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jetson imu board design in my own project?
Its repository states no licence, so its author keeps all rights: ask HighlandersFRC before reusing the design.
Similar boards
- 4 layers68.6 × 53.3 mm
Icezum
FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board
218 parts357GPL-3.0 - 4 layers52.8 × 61.2 mm
GameboyCartridgeV2.1
shilga/rp-gameboy-cartridge-hw
You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.
81 parts72CERN-OHL-P-2.0 - 4 layers82.9 × 64.6 mm
- 4 layers162.2 × 100 mm
- 2 layers100 × 165 mm
- 2 layers100.6 × 159 mm
- 2 layers21.6 × 45.7 mm
