Skip to the content
2 layers31 × 38 mmLipo loader, the printed circuit board in 3D

window handle contact sensor

Size
31 × 38 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
4
Pads
10
Tracks, vias
4, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Jul 2020
Updated
30 Apr 2023

Overview

Lipo loader is an open-source printed circuit board by hggh, from the hggh/window-handle-sensor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 31 × 38 mm with 9 parts on 4 nets, routed with 4 tracks and 0 vias.

It belongs with the home automation and IoT and sensors and measurement boards and the ESP32 boards of this library.

README

README.md

window handle sensor

get the status of your windows. sensor is between your handle and the window.

window_sensor_installed.jpg

magnet_holder.jpg case_sensor_pcb.jpg

TODO

  • replace xc6220 footprint with the one from KiCAD
  • add a button for wifi reset
  • battery connector rotate it: open should be on top

PCBs

this project contains of two pcbs.

window-handle-sensor

This PCB is the sensor. It has three hall sensors placed on a 0.6mm pcb.

library used: https://github.com/hggh/kicad-libraries

BOM of window-handle-sensor pcb
numbername
C1,C2,C3ceramic cap 0.1 µF SMD 0805
U1,U2,U3Infineon TLE4913
ESP controller board

This PCB is the controller board with the ESP32-S2. The thickness of this pcb can be 1.0-1.6mm.

BOM of esp32-s2 pcb
numbername
C1ceramic cap 22µF SMD 0805
C2ceramic cap 4.7µF SMD 0805
C3tantalum cap 220µF SMD EIA-7343-31
C4ceramic cap 100nF SMD 0805
C5ceramic cap 1µF SMD 0805
U1XC6220 3.0V SOT-25
U2ESP32-S2-WROOM
H12.54mm 2x3 pin header
J1JST PH S2B-PH-K
Q1BC817
Q2BC807
R1, R1410k SMD0805
R2, R3, R4100 SMD0805
R5, R6, R7, R8, R910M SMD 0805
R10, R111k1 SMD 0805
R12, R1310k SMD 0805

case

The inlay is placed on the square bolt with 3x magnets.

Magnets: Ø 2 mm, h=1mm (strength: 110g): https://www.supermagnete.de/eng/disc-magnets-neodymium/disc-magnet-2mm-1mm_S-02-01-N

Parts

9
QtyValueFootprintReferences
4MMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
1BATTConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ5
1IN_GNDConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ2
1IN_VCCConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ1
1TP_BATT_GNDConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ4
1TP_BATT_VCCConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ3

More from hggh/window-handle-sensor

2
  • 2 layers40.4 × 33.8 mmEsp32-s2, the printed circuit board in 3D

    Esp32-s2

    hggh/window-handle-sensor

    window handle contact sensor

    31 parts6GPL-3.0

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Lipo loader PCB?

It measures 31 × 38 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lipo loader use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lipo loader KiCad files?

From the hggh/window-handle-sensor repository on GitHub, at the commit this page was made from: the board is pcb/lipo-loader/lipo-loader.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lipo loader design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).