Skip to the content
2 layers22.6 × 25.9 mmMCP73871, the printed circuit board in 3D

A breakout board for the MCP73871 battery charger IC from Microchip. Includes circuitry for load sharing, temperature protection, and indicator LEDs.

Size
22.6 × 25.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
18
Pads
74
Tracks, vias
79, 25
Pours
14
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
27 Oct 2018
Updated
27 Oct 2018

Overview

MCP73871 is an open-source printed circuit board by henryjeynes, from the henryjeynes/MCP73871 repository on GitHub. It is a 2-layer board of 22.6 × 25.9 mm with 22 parts on 18 nets, routed with 79 tracks and 25 vias.

It is built around the MCP73871EV. Its parts include 9 resistors, 5 connectors, 3 capacitors, 3 diodes and 1 IC. It belongs with the power boards of this library.

Main components

1

README

README.md

MCP73871

A breakout board for the MCP73871 battery charger IC from Microchip. Includes circuitry for load sharing, temperature protection, and indicator LEDs.

If you use the resistor values in the schematic (setting the charge current to 1A), be warned that the chip will dissipate up to 3.5 watts. A larger heatsink with or without a fan is mandatory.

Feel free to use the contents of this repo in open-source, personal, or educational applications, as long as you give me credit. Don't use anything in this repo for commercial purposes without my permission. I cannot be held liable in any way for any damage caused directly or indirectly by the contents of this repo.

Parts

22
QtyValueFootprintReferences
3470Resistor_SMD:R_0805_2012MetricR5, R6, R7
24.7uFCapacitor_SMD:C_0805_2012MetricC2, C3
11.54KResistor_SMD:R_1206_3216MetricR4
110KConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalTH1
110uFCapacitor_SMD:C_1206_3216MetricC1
1110KResistor_SMD:R_0805_2012MetricR9
11KResistor_SMD:R_0805_2012MetricR1
1330KResistor_SMD:R_0805_2012MetricR8
133KResistor_SMD:R_0805_2012MetricR3
169.8KResistor_SMD:R_1206_3216MetricR2
1BAT+Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ3
1BAT-Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ5
1LOWLED_SMD:LED_0805_2012MetricD3
1MCP73871Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmU1
1MicroBConnector_USB:USB_Micro-B_Molex-105017-0001J1
1OUT+Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ2
1OUT-Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ4
1PGLED_SMD:LED_0805_2012MetricD1
1STATLED_SMD:LED_0805_2012MetricD2

Similar boards

  • 2 layers86.4 × 110 mmTeensy beats, the printed circuit board in 3D

    Teensy beats

    trailhead/teensy-beats

    Teensy Beats Shield

    144 parts67GPL-3.0
  • 2 layers98 × 56 mmThermal pcb, the printed circuit board in 3D

    Thermal pcb

    Badbird5907/thermal-camera

    My design of a cheap and affordable thermal camera

    68 parts59MIT
  • 2 layers57 × 97 mmMainCollar, the printed circuit board in 3D

    MainCollar

    plyalex/OpenFence

    OpenFence is an open source GPS based digital livestock fencing system and web interface, aiming to reduce barriers of using cell grazing.

    78 parts28GPL-3.0
  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT
  • 4 layers145.5 × 64 mmMuffin, the printed circuit board in 3D

    Muffin

    JunOllyLi/TX_PCB

    NOTE: the latest PCB had been manufactured was v2.0. But it had the Gimbal ZH-connector reversed. The schematics and PCB drawing had been updated to v2.1 to fix that. But v2.1 had not been really manufactured yet.

    138 parts17
  • 2 layers98.5 × 34 mmPulse LoRa, the printed circuit board in 3D

    Pulse LoRa

    risejohan/2Bit

    In this repo we can see some designs with free use for the community, 2 Bit electronic

    86 parts17
  • 6 layers144.8 × 106.7 mmLoriques, the printed circuit board in 3D

    Loriques

    skot/Loriques

    A solar powered Meshtastic LoRa gateway

    122 parts17CERN-OHL-S-2.0
  • 2 layers44.1 × 51 mmPicowalker-32, the printed circuit board in 3D

    Picowalker-32

    mamba2410/picowalker-32

    PCB + firmware for Pokewalker-like device

    50 parts9

Questions

How big is the MCP73871 PCB?

It measures 22.6 × 25.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MCP73871 use?

22 parts, built around the MCP73871EV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MCP73871 KiCad files?

From the henryjeynes/MCP73871 repository on GitHub, at the commit this page was made from: the board is MCP73871.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MCP73871 design in my own project?

Its repository states no licence, so its author keeps all rights: ask henryjeynes before reusing the design.