
Portable film pcb
ForthgoerGa/Portable-film-digitizer
Repo for Portable film digitizer which support one-click scan+post processing for all kinds of film powered by agentic workflow

Water Quality Monitoring in Water Fountain at Gedung K Faculty of Engineering UI
Konservasi air is an open-source printed circuit board by heliumonoxide, from the heliumonoxide/water_quality_monitoring_device repository on GitHub, published under the MIT licence. It is a 2-layer board of 81.5 × 58.7 mm with 31 parts on 48 nets, routed with 158 tracks and 124 vias.
It is built around the ESP32-DEVKITC-VE, DS18B20 and ADS1115, with the IRF520 among its other parts. Its parts include 12 connectors, 5 resistors, 4 capacitors, 2 diodes and 1 IC. It belongs with the ESP32 boards of this library.
This project is a Water Quality Monitoring System supported by both a web interface and an OLED display. The device utilizes the SPIFFS (SPI Flash File System) feature of the ESP32 microcontroller to deploy a native web application (HTML, CSS, JavaScript) over a wide-area local network. The system directly links the web interface to real-time data received by the ESP32, providing users with seamless access to water quality metrics.
The Drinking Fountain is essential for students at the Faculty of Engineering, Universitas Indonesia, providing water and reducing plastic use. However, concerns about water quality have led 60% of students to still purchase bottled water. A survey revealed that 90% of respondents believe the water quality in certain buildings is poor, particularly due to its taste. Addressing these concerns is crucial to encouraging students to trust and use the water fountains.
PCB made using Altium and printed using PCB printing machine.
Here are the made PCB picture
For installation, within Arduino IDE, the following libraries needs to be installed under Sketch -> Include Library -> Manage Libraries:
The following to libraries need to be downloaded, unpacked and copied to the "Arduino" folder (Required for ESPAsyncWebServer)
Required to make SPIFFS.h work: https://github.com/me-no-dev/arduino-esp32fs-plugin/releases/
In the ino. files in this section,
// SSID and password of Wifi connection:
const char* ssid = "[Your Wifi Name]";
const char* password = "[Your Wifi Password]";ssid and password need to be changed according to the router/wifi that is used.
Before uploading the code, please upload data sketch first using ESP32 Sketch Data Upload button on tools dropdown section
Before making the actual device, there are some items that you need to have:
Before using all the sensor, please configurate and calibrate first.
Bryan Indarto, Aldy Raja, Theonaldo, dan Reza Febrian
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3, R4 |
| 2 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 2 | 47u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C3, C4 |
| 1 | 1.5k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | ADS1115 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | ADS1115_ADDR_5V | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | ADS1115_ADDR_SCL | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | ADS1115_ADDR_SDA | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J9 |
| 1 | DC_IN_TERMINAL | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J11 |
| 1 | DS18B20 | Connector_Molex:Molex_SL_171971-0003_1x03_P2.54mm_Vertical | J2 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U1 |
| 1 | ESP_EN_JP | Connector_Molex:Molex_SL_171971-0002_1x02_P2.54mm_Vertical | SW1 |
| 1 | ESP_GPIO_LEFT | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J12 |
| 1 | ESP_GPIO_RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J13 |
| 1 | IN4004 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D2 |
| 1 | IRF520 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | OLED | Connector_Molex:Molex_SL_171971-0004_1x04_P2.54mm_Vertical | J7 |
| 1 | PUMP | Connector_Molex:Molex_SL_171971-0002_1x02_P2.54mm_Vertical | J10 |
| 1 | Red | LED_THT:LED_D3.0mm | D1 |
| 1 | SERVO | Connector_Molex:Molex_SL_171971-0003_1x03_P2.54mm_Vertical | J6 |
| 1 | TDS | Connector_Molex:Molex_SL_171971-0003_1x03_P2.54mm_Vertical | J3 |
| 1 | TURBIDITY | Connector_Molex:Molex_SL_171971-0003_1x03_P2.54mm_Vertical | J4 |
| 1 | pH | Connector_Molex:Molex_SL_171971-0006_1x06_P2.54mm_Vertical | J5 |
The 29 most common of 31 parts.

ForthgoerGa/Portable-film-digitizer
Repo for Portable film digitizer which support one-click scan+post processing for all kinds of film powered by agentic workflow

BioMEMS/OpenDMS
Hardware developed in Prof. Cristina Davis' Bioinstrumentation and BioMEMS laboratory. Publications (i.e. articles, book chapters, etc.) that use this hardware are required to cite the related article…

djsherm/9_motorized_pinwheel_shield
Designing a PCB based on chapter 9 in the Arduino projects book: Motorized Pinwheel

MOSH-Insa-Toulouse/2023_2024_mini_project_Junjiang_Thang_Stephane
rxPin and txPin are defined for the serial connection to the LoRa module, allowing for data transmission and reception.



Kanedinha/ESP_IDF_WIFI_CAR
Remote car controled with Wifi HTTP protocol. Using a ESP32 Wrover-It as a Access point web server, the interface made with HTML and JS comunicate car and control it.

It measures 81.5 × 58.7 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the ESP32-DEVKITC-VE, DS18B20, ADS1115 and IRF520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the heliumonoxide/water_quality_monitoring_device repository on GitHub, at the commit this page was made from: the board is hardware/kicad/konservasi_air.kicad_pcb and its schematic hardware/kicad/konservasi_air.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).