Skip to the content
2 layers50 × 50 mmESP Wifi Car, the printed circuit board in 3D

Remote car controled with Wifi HTTP protocol. Using a ESP32 Wrover-It as a Access point web server, the interface made with HTML and JS comunicate car and control it.

Size
50 × 50 mm
Copper layers
2
Thickness
1.69 mm
Parts
9
Nets
37
Pads
78
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
13 Jan 2023
Updated
30 Dec 2023

Overview

ESP Wifi Car is an open-source printed circuit board by Kanedinha, from the Kanedinha/ESP_IDF_WIFI_CAR repository on GitHub. It is a 2-layer board of 50 × 50 mm with 9 parts on 37 nets.

It is built around the ESP32-DEVKITC-VE and ADS1115. Its parts include 6 connectors, 2 resistors and 1 IC. It belongs with the radio and wireless boards and the ESP32 boards of this library.

Main components

2

README

README.md
Supported TargetsESP32

Kanedinha's project ESP_IDF_WIFI_CAR

RC CAR with wifi connection, using ESP32 WROVER Kit or WROOM Kit.

HLS (HTTP Live Streaming) https://www.youtube.com/watch?v=Ea0JQh54amc

Parts

9
QtyValueFootprintReferences
210kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R3
1ADS1115Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ4
1BMEConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1CAMConnector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_VerticalJ1
1ESP32-DevKitCESP:ESP32-DevKitCU1
1H BridgeConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ9
1ServoConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2
1SourceConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6

More from Kanedinha/ESP_IDF_WIFI_CAR

2
  • 2 layers22 × 55 mmPower, the printed circuit board in 3D

    Power

    Kanedinha/ESP_IDF_WIFI_CAR

    Remote car controled with Wifi HTTP protocol. Using a ESP32 Wrover-It as a Access point web server, the interface made with HTML and JS comunicate car and control it.

    9 parts1
  • 2 layers20 × 50 mmH Bridge, the printed circuit board in 3D

    H Bridge

    Kanedinha/ESP_IDF_WIFI_CAR

    Remote car controled with Wifi HTTP protocol. Using a ESP32 Wrover-It as a Access point web server, the interface made with HTML and JS comunicate car and control it.

    7 parts1

Similar boards

  • 2 layers114.9 × 100 mmWaterMixer, the printed circuit board in 3D

    WaterMixer

    guttih/WaterMixer

    Using Esp32 to mix water temperature

    20 parts1
  • 2 layers81.5 × 58.7 mmKonservasi air, the printed circuit board in 3D

    Konservasi air

    heliumonoxide/water_quality_monitoring_device

    Water Quality Monitoring in Water Fountain at Gedung K Faculty of Engineering UI

    31 partsMIT
  • 2 layers168.9 × 123.3 mmOEM ECU, the printed circuit board in 3D

    OEM ECU

    aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware

    Volvo MKII Open Hardware

    296 parts161CC0-1.0
  • 2 layers94 × 79 mm5 - Lizard Car, the printed circuit board in 3D

    5 - Lizard Car

    TRD-B/Lizard

    3D printed RC race car with custom electronics

    54 parts129CC-BY-4.0
  • 2 layers54.6 × 33 mmJuntekOnSteroidsTTGO, the printed circuit board in 3D

    JuntekOnSteroidsTTGO

    rin67630/Drok-Juntek-on-steroids

    Extend the possibilities of cheap digital power supplies with a WiFi module

    35 parts62
  • 2 layers155 × 70 mmPayphone v1, the printed circuit board in 3D

    Payphone v1

    sdylewski/Analog-Redial

    A circuit board for old telephones to come back to life. Plug one or two phones in, and you can call the other phone, use bluetooth, connect to others via voip, and do a variety of other things with a plain old rotary…

    137 parts46
  • 2 layers32.4 × 33 mmOpenXsensor, the printed circuit board in 3D

    OpenXsensor

    Ingwie/OpenAVRc_Hw

    OpenAVRc Hardware and addons

    40 parts26

Questions

How big is the ESP Wifi Car PCB?

It measures 50 × 50 mm and has 2 copper layers, 1.69 mm thick.

What parts does the ESP Wifi Car use?

9 parts, built around the ESP32-DEVKITC-VE and ADS1115. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP Wifi Car KiCad files?

From the Kanedinha/ESP_IDF_WIFI_CAR repository on GitHub, at the commit this page was made from: the board is HW/ESP Wifi Car/ESP Wifi Car.kicad_pcb and its schematic HW/ESP Wifi Car/ESP Wifi Car.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP Wifi Car design in my own project?

Its repository states no licence, so its author keeps all rights: ask Kanedinha before reusing the design.