2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers
Segger Breakout1
Hecatron/Embedded.Rust.ExamplesThis is a series of examples / templates I've put together for using Rust with an embedded platform such as the ESP32
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 45
- Pads
- 183
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Oct 2021
- Updated
- 31 Jul 2025
Overview
Segger Breakout1 is an open-source printed circuit board by Hecatron, from the Hecatron/Embedded.Rust.Examples repository on GitHub. It is a 2-layer board with 10 parts on 45 nets.
Its parts include 9 connectors and 1 IC. It belongs with the RP2040 boards of this library.
README
Readme.mdReadme
This is a series of examples / templates I've put together for using Rust with an embedded platform such as the ESP32
ESP32 Examples
The ESP32 Examples are based on the repo
TODO
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Breakout | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | JLink IDC | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J4 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | Pico GPIO1 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J7 |
| 1 | Pico GPIO2 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J5 |
| 1 | Pico SWD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | RP2040 IO | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | RP2040 Power | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | SWD Mini IDC | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J3 |
Questions
What parts does the Segger Breakout1 use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Segger Breakout1 KiCad files?
From the Hecatron/Embedded.Rust.Examples repository on GitHub, at the commit this page was made from: the board is hardware/Segger-Breakout1/Segger-Breakout1.kicad_pcb and its schematic hardware/Segger-Breakout1/Segger-Breakout1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Segger Breakout1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hecatron before reusing the design.
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0