

Zmod
Miscellaneous KiCad work
- Size
- 45 × 70 mm
- Copper layers
- 6
- Thickness
- 1.56 mm
- Parts
- 12
- Nets
- 34
- Pads
- 74
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Jun 2022
- Updated
- 17 Feb 2026
Overview
Zmod is an open-source printed circuit board by hdlguy, from the hdlguy/kicad repository on GitHub, published under the MIT licence. It is a 6-layer board of 45 × 70 mm with 12 parts on 34 nets.
Its parts include 3 resistors, 2 diodes and 1 connector.
README
microzed_carrier/readme.mdconnectors
carrier side = 61083-101400LF - https://www.amphenol-cs.com/bergstak-61083101400lf.html
microzed side = 61082-101400LF - https://www.amphenol-cs.com/bergstak-61082101400lf.html
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4, H5, H6 |
| 2 | 240 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 10k,1% | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | QTE-020-01-X-D-A | pedrolib:SAMTEC_QTE-020-01-X-D-A | J1 |
More from hdlguy/kicad
9- 2 layers158.8 × 120.6 mm

- 6 layers167.7 × 68.9 mm

- 4 layers50 × 70 mm

- 4 layers70 × 75 mm

- 2 layers25.9 × 21.3 mm

- 2 layers82.6 × 101.6 mm

- 2 layers80 × 85 mm

- 6 layers140 × 119 mm

- 4 layers167.7 × 68.9 mm

Similar boards
- 6 layers7.5 × 8 mm

- 6 layers48.4 × 48.4 mm

- 6 layers92.5 × 69 mm

- 6 layers19 × 26.7 mm

DishBrain
aliihsan1913/Wetware-Interface-Architecture
Interdisciplinary neural interface project involving FPGA development, custom PCB design and SNN simulation.
11 parts - 6 layers80.5 × 99.8 mm

- 6 layers22 × 80 mm

- 6 layers50 × 50 mm

- 6 layers23.5 × 8.4 mm

Questions
How big is the Zmod PCB?
It measures 45 × 70 mm and has 6 copper layers, 1.56 mm thick.
What parts does the Zmod use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zmod KiCad files?
From the hdlguy/kicad repository on GitHub, at the commit this page was made from: the board is zmod_standard/zmod.kicad_pcb and its schematic alinx_carrier/alinx_carrier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zmod design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).