
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

Control power is an open-source printed circuit board by hcmos, from the hcmos/open_rover-pwr_pcb repository on GitHub. It is a 2-layer board of 90 × 70 mm with 33 parts on 20 nets, routed with 39 tracks and 166 vias.
It is built around the TPS5430DDA. Its parts include 8 resistors, 6 capacitors, 4 diodes, 3 connectors and 2 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6, R7, R8 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 2 | 0.01u | Capacitor_SMD:C_0603_1608Metric | C2, C5 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 15uH | Inductor_SMD:L_Chilisin_BMRx00060630 | L1, L2 |
| 2 | 18k | Resistor_SMD:R_0603_1608Metric | R1, R4 |
| 2 | 220u | Capacitor_SMD:CP_Elec_6.3x7.7 | C3, C6 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric | R2, R5 |
| 2 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J2, J3 |
| 2 | Conn_01x02 | my_pretty:pd_board | USBPD1, USBPD2 |
| 2 | D_Schottky | Diode_SMD:D_SOD-123F | D1, D2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D3, D4 |
| 2 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U1, U2 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
| 1 | LOGO | logo_pretty:rdclab_small | G*** |
The 32 most common of 33 parts.

doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!

Alia5/PiCCANTE
PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)


pms67/BananaSchplit
Single rail DC (<12V) to split rail DC supply (+/-12V and +5V).

intechstudio/knot
Knot is the bridge between old-school MIDI gear like synthesizers, groove boxes, guitar pedals and neat USB MIDI devices.

CuriousMotor/Onyx-Stepper-Motherboard
The successor of the iconic Arduino-CNC-shield

JohnDecebal/UNDR
UNDR AUTO is a fully automatic WDT (Weiss Distribution Technique) tool designed for espresso enthusiasts. This open-source DIY project combines 3D printed parts with electronic and mechanical components to create a…

luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
It measures 90 × 70 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the TPS5430DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hcmos/open_rover-pwr_pcb repository on GitHub, at the commit this page was made from: the board is control_power.kicad_pcb and its schematic control_power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hcmos before reusing the design.