Skip to the content
2 layers14.8 × 48 mmEncoder, the printed circuit board in 3D

HomeBrew Robotics Club Robot Platform

Size
14.8 × 48 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
6
Pads
19
Tracks, vias
64, 5
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Nov 2019
Updated
25 Jul 2021

Overview

Encoder is an open-source printed circuit board by hbrobotics, from the hbrobotics/hbrc_ros_robot_platform repository on GitHub. It is a 2-layer board of 14.8 × 48 mm with 5 parts on 6 nets, routed with 64 tracks and 5 vias.

Its parts include 2 resistors, 2 transistors and 1 connector. It belongs with the robots and motor control boards of this library.

README

electrical/wow_fix/rev_a/README.md

LD06 Lidar Adapter

The LD06 is an inexpensive and small LIDAR produced by LDROBOT. It is available in the United State via Amazon for approximately $100 (as of late December 2020.) There is techinical documenation available.

The adpater board converts from the generic HR2 daughter board format to the 4-pin connector used by the LD06. The host microcontroller is responsible for providing a PWM signal and a UART to listen for the returned data stream from the LD06.

Parts

5
QtyValueFootprintReferences
2100Ω;1005Resistor_SMD:R_0402_1005MetricR1, R2
2AH1806;SC59HR2:SC59Q1, Q2
1ENCODER;2xM1x3RAHR2:ENCODER_2xM1x3RACN1

More from hbrobotics/hbrc_ros_robot_platform

10
  • 4 layers145.3 × 156.6 mmMaster board, the printed circuit board in 3D

    Master board

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    226 parts6
  • 2 layers14.8 × 48 mmEncoder, the printed circuit board in 3D

    Encoder

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    7 parts6
  • 2 layers14.8 × 48 mmEncoder, the printed circuit board in 3D

    Encoder

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    7 parts6
  • 2 layers20 × 12 mmLd06 adapter, the printed circuit board in 3D

    Ld06 adapter

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    2 parts6
  • 2 layers23.5 × 12 mmLd06 adapter, the printed circuit board in 3D

    Ld06 adapter

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    2 parts6
  • 2 layers12 × 14 mmSonar adapter, the printed circuit board in 3D

    Sonar adapter

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    2 parts6
  • 2 layers40 × 24.6 mmSt adapter, the printed circuit board in 3D

    St adapter

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    2 parts6
  • 2 layers40 × 24.6 mmSt adapter, the printed circuit board in 3D

    St adapter

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    2 parts6
  • 2 layers40 × 24.6 mmSt adapter, the printed circuit board in 3D

    St adapter

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    2 parts6
  • 2 layers34 × 24 mmWow fix, the printed circuit board in 3D

    Wow fix

    hbrobotics/hbrc_ros_robot_platform

    HomeBrew Robotics Club Robot Platform

    2 parts6

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Encoder PCB?

It measures 14.8 × 48 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Encoder use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Encoder KiCad files?

From the hbrobotics/hbrc_ros_robot_platform repository on GitHub, at the commit this page was made from: the board is electrical/encoder/rev_a/encoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Encoder design in my own project?

Its repository states no licence, so its author keeps all rights: ask hbrobotics before reusing the design.