
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Koala Extender is an open-source printed circuit board by hazbounn, from the hazbounn/Koala-Extender repository on GitHub. It is a 4-layer board of 175.6 × 61.2 mm with 75 parts on 92 nets, routed with 425 tracks and 78 vias.
It is built around the 74HC165D. Its parts include 32 switches, 21 capacitors and 5 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW301, SW302, SW303, SW304, SW305, SW306, SW307, SW308, SW701, SW702, SW703, SW704, SW705, SW706, SW707, SW708 +8 |
| 16 | 10nF | Capacitor_SMD:C_0805_2012Metric | C201, C202, C203, C204, C205, C206, C207, C208, C401, C402, C403, C404, C405, C406, C407, C408 |
| 10 | R_Network04 | Resistor_THT:R_Array_SIP5 | RN202, RN204, RN301, RN302, RN402, RN404, RN701, RN702, RN801, RN802 |
| 8 | RotaryEncoder | koala-extender:PEC12R-4XXXF-NXXXX_BRN | SW201, SW202, SW203, SW204, SW401, SW402, SW403, SW404 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C209, C301, C409, C701, C801 |
| 5 | 74HC165 | Package_DIP:DIP-16_W7.62mm | U201, U301, U401, U701, U801 |
| 4 | R_Pack04_SIP | Resistor_THT:R_Array_SIP8 | RN201, RN203, RN401, RN403 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A101 |
The 73 most common of 75 parts.

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed


westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files

slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64


It measures 175.6 × 61.2 mm and has 4 copper layers, 1.6 mm thick.
75 parts, built around the 74HC165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hazbounn/Koala-Extender repository on GitHub, at the commit this page was made from: the board is koala-extender/koala-extender.kicad_pcb and its schematic koala-extender/button-group-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hazbounn before reusing the design.