

Fieldmill2
Hardware and software for an electrostatic field mill
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 103
- Pads
- 390
- Tracks, vias
- 1,189, 32
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Aug 2019
- Updated
- 28 Aug 2019
Overview
Fieldmill2 is an open-source printed circuit board by haunma, from the haunma/fieldmill repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 4-layer board with 112 parts on 103 nets, routed with 1,189 tracks and 32 vias.
It is built around the OPA4197ID, DRV10975ZPWP and TLV4376IPW, with the TPS72301DBV, USBLC6-2P6 and BAV199 among its other parts. Its parts include 38 resistors, 35 capacitors, 9 ICs, 4 diodes and 4 connectors. It belongs with the STM32 boards of this library.
Main components
6OPA4197ID
SOIC-14-18V~-2.25V、2.25V~18V -40℃~+125℃ 100uV 10MHz 120dB 1mA 2.5uV/℃ 20V/us 2pA 4.5V~36V 5.5nV/√Hz@1kHz 5pA 65mA EMI filtering/RF suppression、Reverse-phase input protection Four channels Rail-to-Rail Input, Rail-to-Rail Output SOIC-14 Precision Op Amps ROHSTexas InstrumentsOperational AmplifierDRV10975ZPWP
HTSSOP-24-EP-40℃~+125℃ 1.5A 250mΩ 2A 6.5V~18V 80uA I2C Three Phase Yes HTSSOP-24-EP Brushless DC (BLDC) Motor Driver ROHSTexas InstrumentsMotor Driver ICsTLV4376IPW
TSSOP-14-40℃~+125℃ 0.2pA 0.3pA 1uV/℃ 2.2V~5.5V 2V/us 30mA 4 5.5MHz 50uV 72dB 815uA 8nV/√Hz@1kHz ESD protection、Reverse-phase input protection Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Precision Op Amps ROHSTexas InstrumentsOperational AmplifierTPS72301DBV
SOT-23-5-40℃~+125℃@(Tj) 1 1.2V~10V 10V 200mA 200uA 500mV@(200mA) 60uVrms 65dB@(1kHz) Adjustable Negative Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)BAV199
SOT-231 Pair Series Connection 1.25V@150mA 160mA 4A 5nA@75V 85V SOT-23 Diodes - General Purpose ROHSNexperiaDiodes - General Purpose
README
README.mdField mill
Work in progress...
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitors_SMD:C_0603 | C6, C7, C11, C12, C17, C18, C21, C22, C24, C25, C26, C27, C28, C31, C35 |
| 8 | 12k | Resistors_SMD:R_0603 | R9, R10, R11, R12, R13, R14, R15, R16 |
| 7 | 1206 hop | Resistors_SMD:R_1206 | JP4, JP8, JP9, JP10, JP11, JP12, JP13 |
| 5 | 0603 hop | Resistors_SMD:R_0603 | JP2, JP3, JP5, JP6, JP7 |
| 4 | 10k | Resistors_SMD:R_0603 | R28, R31, R32, R36 |
| 4 | 10n | Capacitors_SMD:C_0603 | C13, C14, C15, C16 |
| 4 | 1u | Capacitors_SMD:C_0603 | C39, C40, C42, C43 |
| 4 | 220p | Capacitors_SMD:C_0603 | C5, C8, C9, C10 |
| 4 | 3k | Resistors_SMD:R_0603 | R17, R18, R19, R20 |
| 4 | 47M | Resistors_SMD:R_0603 | R5, R6, R7, R8 |
| 4 | 47k | Resistors_SMD:R_0603 | R1, R2, R3, R4 |
| 4 | BAV199 | TO_SOT_Packages_SMD:SOT-323_SC-70 | D1, D2, D3, D4 |
| 3 | Mounting holes | My footprints:Wurth_9771050360R | MK1, MK2, MK3 |
| 2 | 0 | Resistors_SMD:R_0603 | R27, R38 |
| 2 | 10p | Capacitors_SMD:C_0603 | C19, C20 |
| 2 | 10u | Capacitors_SMD:C_0805 | C32, C41 |
| 2 | 1M | Resistors_SMD:R_0603 | R24, R25 |
| 2 | 2M | Resistors_SMD:R_0603 | R23, R26 |
| 1 | 0 | Resistors_SMD:R_1206 | R37 |
| 1 | 0805 hop | Resistors_SMD:R_0805 | JP1 |
| 1 | 100n | Resistors_SMD:R_0805 | C37 |
| 1 | 10u electrolytic | My footprints:Panasonic_ECEV1CA220P | C23 |
| 1 | 11.5k | Resistors_SMD:R_0603 | R35 |
| 1 | 180 | Resistors_SMD:R_0603 | R30 |
| 1 | 2.2u | Resistors_SMD:R_0805 | C34 |
| 1 | 2.2u | Capacitors_SMD:C_0603 | C33 |
| 1 | 22.1k | Resistors_SMD:R_0603 | R34 |
| 1 | 330 | Resistors_SMD:R_0603 | R29 |
| 1 | 39 | Resistors_SMD:R_0805 | R33 |
| 1 | 430k | Resistors_SMD:R_0603 | R22 |
| 1 | 620k | Resistors_SMD:R_0603 | R21 |
| 1 | ABM3B-8.0 | My footprints:Abracon_ABM3B | Y1 |
| 1 | Battery (2x 18650), BLDC motor | Connectors_JST:JST_GH_BM06B-GHS-TBT_06x1.25mm_Straight | J4 |
| 1 | Brush pad | My footprints:brush_pad | TP2 |
| 1 | Brush pads | My footprints:brush_pad | TP1 |
| 1 | DRV10975Z | My footprints:TSSOP24_EP | U11 |
| 1 | FB | Resistors_SMD:R_0603 | L1 |
| 1 | JTAG SWD | Connectors_JST:JST_GH_SM04B-GHS-TB_04x1.25mm_Angled | J2 |
| 1 | OPA4197 | SMD_Packages:SOIC-14_N | U1 |
| 1 | Optical Comms | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm_SMD_Pin1Left | J3 |
| 1 | Reset | My footprints:CK_KXT3_switch | SW1 |
| 1 | STM32L496RxT | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U4 |
| 1 | Si8605 | Housings_SOIC:SOIC-16W_5.3x10.2mm_Pitch1.27mm | U7 |
| 1 | TLV4376 | My footprints:TSSOP14 | U2 |
| 1 | TLV700xx | My footprints:SOT-23-5_HandSoldering | U9 |
| 1 | TPS72301 | My footprints:SOT-23-5_HandSoldering | U10 |
| 1 | USB debug | Connectors_JST:JST_GH_SM04B-GHS-TB_04x1.25mm_Angled | J1 |
| 1 | USBLC6-2 | My footprints:SOT-23-6_Handsoldering | U3 |
| 1 | Vishay_VCNT2020 | My footprints:Vishay_VCNT2020 | U6 |
| 1 | mill_sensor | My footprints:mill_sensor | Z1 |
More from haunma/fieldmill
1- 4 layers86 × 96 mm

Similar boards
- 4 layers36 × 95 mm

- 2 layers40 × 108 mm

- 4 layers84.1 × 66 mm

- 2 layers27.1 × 24 mm

- 2 layers132.1 × 121.9 mm

Avionics Battery Prototype - Rev C
dolson14/k7arx
Circuit and PCB Designs, anything else related to radio and electronics
60 parts - 2 layers100 × 100 mm

- 6 layers71.5 × 63.6 mm

Sensorboard
CameraNexus/sitina1
Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…
426 parts82MIT - 4 layers129.5 × 52.3 mm

Questions
What parts does the Fieldmill2 use?
112 parts, built around the OPA4197ID, DRV10975ZPWP, TLV4376IPW and TPS72301DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fieldmill2 KiCad files?
From the haunma/fieldmill repository on GitHub, at the commit this page was made from: the board is hardware/fieldmill/fieldmill2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fieldmill2 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).