
OBSPro
FabianSchwartau/OBSPro
Version of the OpenBikeSensor hardware optimized for PCBA

Test jig software and hardware for SH-RPi
SH RPi test jig hardware is an open-source printed circuit board by hatlabs, from the hatlabs/SH-RPi-test-jig repository on GitHub, published under the Apache-2.0 licence. It is an 8-layer board of 66 × 35.6 mm with 44 parts on 17 nets, routed with 104 tracks and 0 vias.
It is built around the DMP3098L, S8050 and SM4007PL. Its parts include 28 connectors, 9 resistors, 2 capacitors, 2 ICs and 2 transistors.
This repository contains two separate PlatformIO projects, one Raspberry Pi software project, and KiCad hardware design that can be used to implement SH-RPi test jig functionality.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J101, J102, J103, J104, J105, J106, J107, J108, J109, J110, J111, J112, J113, J114, J115, J116 +12 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R102, R104, R105, R106, R108, R109 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R101, R103 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C101, C102 |
| 1 | 4k | Resistor_SMD:R_0603_1608Metric | R107 |
| 1 | ADS1115-module | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | U101 |
| 1 | DMP3098L | Package_TO_SOT_SMD:SOT-23 | Q102 |
| 1 | H7533 | Package_TO_SOT_SMD:SOT-23 | U102 |
| 1 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q101 |
| 1 | SM4007PL | Diode_SMD:D_SOD-123F | D101 |

FabianSchwartau/OBSPro
Version of the OpenBikeSensor hardware optimized for PCBA

jwaeles/xmas-2019
Dynamic christmas gift label that scrolls the name of the person it's for when you shake the gift






It measures 66 × 35.6 mm and has 8 copper layers, 1.6 mm thick.
44 parts, built around the DMP3098L, S8050 and SM4007PL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hatlabs/SH-RPi-test-jig repository on GitHub, at the commit this page was made from: the board is SH-RPi-test-jig-hardware/SH-RPi-test-jig-hardware.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).