Skip to the content
2 layers80 × 45 mmKizami, the printed circuit board in 3D

FPGA side of Kizami — cycle-exact timecode + audio witness on iCE40

Size
80 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
23
Pads
170
Tracks, vias
1,156, 83
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Sep 2026
Updated
21 Sep 2026

Overview

Kizami is an open-source printed circuit board by hasky00, from the hasky00/kizami-core repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 45 mm with 36 parts on 23 nets, routed with 1,156 tracks and 83 vias.

It is built around the CH340C, ESP32-WROOM-32 and AMS1117-3.3, with the DS3231SN#T&R, S8050 and CR2032 among its other parts. Its parts include 11 resistors, 9 capacitors, 5 connectors, 4 ICs and 2 transistors. It belongs with the fPGA and programmable logic and audio and music boards and the ESP32 boards of this library.

Main components

6

README

README.md

Kizami

kizami-core

The FPGA side of Kizami — a Nostr-timestamped audio witness. Runs on the open-hardware Alhambra II (iCE40HX4K).

  • rtl/ — Verilog. timecode.v is the HH:MM:SS:FF counter, top.v maps it to LEDs.
  • icestudio/ — .ice designs for Icestudio / FPGALab.
  • labs/ — FPGALab workbench configs.
  • docs/ — LTC frame layout and the roadmap.

Simulate (no hardware)

  1. Open icestudio/ design in Icestudio, build once so ice-build/ exists.
  2. fpga-lab --ice icestudio/<design>.ice --clock-hz 1200000 (slow mode, readable LEDs).

Build & flash (Alhambra II)

text
pip install apio && apio install --all
apio build && apio upload

LED0–4 = frame count in binary, LED7 = blinks once per second.

License: MIT

Parts

36
QtyValueFootprintReferences
610kResistor_SMD:R_0603_1608MetricR3, R4, R7, R8, R9, R11
410uFCapacitor_SMD:C_0603_1608MetricC2, C4, C5, C8
4M3MountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3100nFCapacitor_SMD:C_0603_1608MetricC3, C6, C9
24.7kResistor_SMD:R_0603_1608MetricR1, R2
25.1kResistor_SMD:R_0603_1608MetricR5, R6
2S8050Package_TO_SOT_SMD:SOT-23Q1, Q2
110nFCapacitor_SMD:C_0603_1608MetricC7
11kResistor_SMD:R_0603_1608MetricR10
11uFCapacitor_SMD:C_0603_1608MetricC1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U4
1BTN1 RECConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1BTN2 MENUConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1CH340CPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU3
1CR2032Battery:BatteryHolder_Keystone_3034_1x20mmBT1
1DS3231SNPackage_SO:SOIC-16W_7.5x10.3mm_P1.27mmU2
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U1
1JACK TIP RING SLEEVEConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1OLED GND VCC SCL SDAConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1USB-CConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J6

Similar boards

  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104
  • 2 layers35 × 45 mmLVGLDevKit, the printed circuit board in 3D

    LVGLDevKit

    jppang/ESP32_MicroPython_LVGL_ST7789

    Try to build an ESP32 firmware with LVGL and ST7789 drivers inside.

    40 parts2
  • 4 layers100 × 80 mmHackathon board v2, the printed circuit board in 3D

    Hackathon board v2

    Brian-Nziza/ESP32-Hackathon-Board

    KiCad 10 project. Board is 100 × 80 mm, four layers, fabricated by JLCPCB.

    75 parts
  • 2 layers162.8 × 99.9 mmPSU, the printed circuit board in 3D

    PSU

    Sakib-Ansari/Linear_Programmable_Power_Supply

    This repository contains the complete KiCad project for a multi-board linear programmable bench power supply. The design is organized into separate PCBs, including the Power Board, Control Board, Front Panel, Output…

    133 partsMIT
  • 4 layers72 × 53 mmUnijoysticle2 xl800, the printed circuit board in 3D

    Unijoysticle2 xl800

    ricardoquesada/unijoysticle2

    Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.

    58 parts62
  • 2 layers63 × 60.8 mmEsp32node wip, the printed circuit board in 3D

    Esp32node wip

    MadsRudolph/personal-projects

    One passive crossover board per speaker, so build two. Single-sided, through-hole only, CNC isolation-milled with an 0.8 mm end mill (the DTU 62768 process).

    32 parts
  • 4 layers100 × 100 mmPCB Design, the printed circuit board in 3D

    PCB Design

    ConquerToFreedom/SwasthEdge

    Low-cost self-diagnosing edge controller for industrial sensor reliability

    89 parts2
  • 2 layers49.4 × 95.7 mmPhysiowand, the printed circuit board in 3D

    Physiowand

    1tsMS/Physiowand

    91 parts

Questions

How big is the Kizami PCB?

It measures 80 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kizami use?

36 parts, built around the CH340C, ESP32-WROOM-32, AMS1117-3.3 and DS3231SN#T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kizami KiCad files?

From the hasky00/kizami-core repository on GitHub, at the commit this page was made from: the board is kizami/kizami.kicad_pcb and its schematic kizami/kizami.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kizami design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).