Skip to the content
4 layersSmartwatch, the printed circuit board in 3D

a Project in which i Design a PCB for a STM32 based Smartwatch and eventually Programm it with FreeRTOS

Copper layers
4
Thickness
1.6 mm
Parts
43
Nets
48
Pads
224
Tracks, vias
486, 101
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 May 2024
Updated
7 Aug 2024

Parts

43
QtyValueFootprintReferences
10100nfCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C5, C8, C9, C10, C14, C15, C16
44.7ufCapacitor_SMD:C_0603_1608MetricC1, C11, C12, C13
34.7kResistor_SMD:R_0805_2012MetricR5, R6, R10
21RResistor_SMD:R_0805_2012MetricR2, R4
29pfCapacitor_SMD:C_0603_1608MetricC6, C7
2DDiode_SMD:D_0603_1608MetricD1, D2
1
110kResistor_SMD:R_0805_2012MetricR3
115kResistor_SMD:R_0805_2012MetricR1
120MhzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmX2
1Battery inputConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1Conn_01x15MyButtons:FPC-SMD_15P-P0.50_KH-FG0.5-H2.0-15P-SMTJ3
1INA3221Package_DFN_QFN:Texas_RGV0016A_VQFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mmU6
1LSE 32khzCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY2
1LSM6DS3Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU2
1LT1761-3.3Package_TO_SOT_SMD:TSOT-23-5U5
1STM32L432KBUxPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmU1
1SW_SPDTMyButtons:MSK12CO2SW1
1Serial wire/ChargingConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1TP4056Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP2.5x3mm_Mask1.73x2.36mmU4
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U8
1USB_B_MicroConnector_USB:USB_Micro-B_Amphenol_10118194_HorizontalJ5
1W25Q128JVPIQPackage_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mmU3
1[Jumper]Resistor_SMD:R_0805_2012MetricR7

The 42 most common of 43 parts.

Similar boards

  • 4 layers70 × 40 mmTagger, the printed circuit board in 3D

    Tagger

    northernpaws/lasernet-rev1

    Retrofit Zigbee PCBs, firmware, and a custom Linux-based game controller for the lasertag.net Falcon system.

    80 parts
  • 4 layers322.5 × 183.5 mmDancing forest, the printed circuit board in 3D

    Dancing forest

    sequoia-hope/dancing-forest-pcb

    The PCB design for the Dancing Forest art project

    239 parts1
  • 4 layers310.5 × 21.4 mmFlute, the printed circuit board in 3D

    Flute

    Kreyl/Flute

    104 parts
  • 2 layers39 × 19.2 mmLestanarve, the printed circuit board in 3D

    Lestanarve

    Kreyl/Lestanarve

    BeltOfLight

    49 parts
  • 4 layers60.8 × 64.8 mmLocketNfc, the printed circuit board in 3D

    LocketNfc

    Kreyl/LocketNFC

    Locket with BT & NFC

    166 parts
  • 4 layers259.1 × 13.5 mmMagicStick, the printed circuit board in 3D

    MagicStick

    Kreyl/MagicStick

    ...Because MagicWand is cursed.

    113 parts
  • 4 layers115.5 × 14.4 mmMagicWand, the printed circuit board in 3D

    MagicWand

    Kreyl/MagicWand

    Hardware & firmware for magic wand

    86 parts
  • 4 layers18 × 96 mmSpear, the printed circuit board in 3D

    Spear

    Kreyl/Spear

    82 parts

Questions

What parts does the Smartwatch use?

43 parts, built around the W25Q128JVPIQ, LSM6DS3, TP4056 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Smartwatch KiCad files?

From the Haron123/stm32_smartwatch repository on GitHub, at the commit this page was made from: the board is PCB/smartwatch.kicad_pcb and its schematic PCB/smartwatch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Smartwatch design in my own project?

Its repository states no licence, so its author keeps all rights: ask Haron123 before reusing the design.