2 layers25 × 18 mm
Batt
HarkonenBade/batt
A 1S lipo charge/protect board based on the TP4056 and the FS312F
20 parts3CC-BY-SA-4.0
2 layers25 × 18 mm
Led addon
HarkonenBade/batt3A 1S lipo charge/protect board based on the TP4056 and the FS312F
- Size
- 25 × 18 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 14
- Pads
- 54
- Tracks, vias
- 96, 14
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Sep 2020
- Updated
- 19 Sep 2021
Overview
Led addon is an open-source printed circuit board by HarkonenBade, from the HarkonenBade/batt repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 25 × 18 mm with 26 parts on 14 nets, routed with 96 tracks and 14 vias.
It is built around the MIC1557YM5. Its parts include 6 connectors, 5 resistors, 4 capacitors, 3 diodes and 2 ICs. It belongs with the power boards of this library.
Main components
1README
README.mdBatt
A simple and compact TP4056 based LiPo charge and protection board.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | batt:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3 | |
| 2 | Diode_SMD:D_SOD-523 | D2, D3 | |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 0r1 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 0r286 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 4.7uH | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 4r | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | GND | batt:PinHeader_1x01_P2.54mm_Vertical_nosilk | J6 |
| 1 | LED | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | D1 |
| 1 | LED+ | batt:PinHeader_1x01_P2.54mm_Vertical_nosilk | J2 |
| 1 | LED- | batt:PinHeader_1x01_P2.54mm_Vertical_nosilk | J3 |
| 1 | MIC1557 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PAM2804 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | STRT1 | batt:PinHeader_1x01_P2.54mm_Vertical_nosilk | J5 |
| 1 | STRT2 | batt:PinHeader_1x01_P2.54mm_Vertical_nosilk | J8 |
| 1 | VCC | batt:PinHeader_1x01_P2.54mm_Vertical_nosilk | J1 |
Questions
How big is the Led addon PCB?
It measures 25 × 18 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Led addon use?
26 parts, built around the MIC1557YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Led addon KiCad files?
From the HarkonenBade/batt repository on GitHub, at the commit this page was made from: the board is led-addon/led-addon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Led addon design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from HarkonenBade/batt
1Similar boards
- 2 layers94 × 85 mm
- 4 layers165 × 43.5 mm
1U Backplane
kaysond/1U-DiskShelf
A 3D-Printable 1U Disk Shelf (4 bays) With Custom SATA Backplane
36 parts16 - 4 layers104 × 255 mm
- 4 layers86 × 96 mm
- 2 layers57.3 × 19 mm
- 2 layers98 × 59.5 mm
MCP23017 PCB
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
26 parts915 - 2 layers142.9 × 98.5 mm
- 2 layers86.1 × 86.1 mm
