
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

count days on a display
Daycounter is an open-source printed circuit board by hanneskt, from the hanneskt/daycounter repository on GitHub. It is a 2-layer board of 126 × 36.5 mm with 17 parts on 36 nets, routed with 502 tracks and 64 vias.
It is built around the MAX7219M. Its parts include 4 connectors, 3 resistors, 3 ICs and 2 capacitors. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | D1X8K-14BL | hannes_library:1106AW_1inch_7_segment | DS1, DS2, DS3, DS4, DS5 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J3, J4 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 240R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 48R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ESP32-C3_SUPERMINI_SMD | foots:MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | MAX7219 | Package_DIP:DIP-24_W7.62mm | U2 |

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.


StarGate01/hl-alyx-glove
Firmware and Hardware for a Half-Life: Alyx Gravity Glove Replica


Eigenbaukombinat/glowboard
The Glowboard Plotter plots images using 64 UV LEDs attached in a line moved over a 120cmx60cm glow-in-the-dark sheet by a stepper.



It measures 126 × 36.5 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the MAX7219M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hanneskt/daycounter repository on GitHub, at the commit this page was made from: the board is pcb/daycounter.kicad_pcb and its schematic pcb/daycounter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hanneskt before reusing the design.