

Zapper
Ein Blutzapper nach Dr. Robert C. Beck CC/CV Akku OLED
- Size
- 50 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 82
- Pads
- 276
- Tracks, vias
- 768, 107
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Sep 2026
- Updated
- 4 Sep 2026
Overview
Zapper is an open-source printed circuit board by hanebuechenes, from the hanebuechenes/ZapZap repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 75 mm with 78 parts on 82 nets, routed with 768 tracks and 107 vias.
It is built around the ATMEGA328P-AU, CH340C and TTP223-BA6, with the MT3608, TP4056 and BC847 among its other parts. Its parts include 27 resistors, 15 capacitors, 9 ICs, 9 transistors and 7 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
10ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTTP223-BA6
SOT-23-6-40℃~+85℃ 1 1.5uA 2V~5.5V 4kV 60ms Capacitive Touch、Automatic sensitivity calibration No、Yes SOT-23-6 Touch Sensors ROHSTontek Design TechTouch SensorsMT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs1N5819HW
SOD-123-65℃~+150℃ 1 Independent 1A 1mA@40V 25A 40V 450mV@1A SOD-123 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdZapZap
Ein Blutzapper nach Dr. Robert C. Beck CC/CV Akku OLED
📜 Lizenzierung / License
Dieses Projekt ist unter dualen Open-Source-Lizenzen veröffentlicht:
-
Hardware & Design (KiCad, Gerber, 3D-STL/STEP):
Lizenziert unter Creative Commons Attribution 4.0 International (CC BY 4.0).

-
Software & Firmware (C++ Source Code):
Lizenziert unter der GNU General Public License v3.0 (GPLv3).
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C5, C8, C9, C10, C11, C12, C13, C14, C15 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R15, R16, R17, R24, R26 |
| 7 | 1k | Resistor_SMD:R_0805_2012Metric | R10, R11, R19, R20, R22, R23, R27 |
| 4 | 100k | Resistor_SMD:R_0805_2012Metric | R14, R18, R21, R25 |
| 3 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q9 |
| 3 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1, Q6, Q7 |
| 3 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_D4.0mm | J3, J6, J7 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H2, H3, H4 |
| 3 | TTP223-BA6 | EasyEDA:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U7, U8, U9 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 2 | 4,7k | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 2 | 5,1k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LED | LED_THT:LED_D3.0mm | D2, D3 |
| 1 | 1N5819HW | Diode_SMD:D_SMA | D1 |
| 1 | 1k 1% | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 1k(1%) | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 2,4k | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 22uF 35V | Capacitor_SMD:C_1206_3216Metric | C4 |
| 1 | 22uH | Capacitor_SMD:C_1210_3225Metric | L1 |
| 1 | 430k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q8 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U5 |
| 1 | Akku3.7V | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical_SMD | J5 |
| 1 | AudioJack3_Switch | Connector_Audio:Jack_3.5mm_CUI_SJ1-3515N_Horizontal | J2 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | ISP1 |
| 1 | Crystal | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | LM358_DFN | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP1.05x1.75mm | U3 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Similar boards
- 2 layers68.9 × 23 mm

- 2 layers67 × 96 mm

- 2 layers62 × 6 mm

TableLight
jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…
72 partsMIT - 2 layers88.9 × 61.6 mm

- 2 layers49.3 × 100.1 mm

MarcadorPing
IBRAM2/Scoreboard_TableTennis
You need Windows OS to install proteus 1. Install the .exe, the default installationpath is: > C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional
14 parts - 2 layers102.5 × 199 mm

- 2 layers90 × 45 mm

Esp32-dalitester
lukasprojects/esp32-dalitester
Small ESP32 DALI tester for commissioning and maintaining light installations via the DALI bus
84 parts - 2 layers80 × 50 mm

Questions
How big is the Zapper PCB?
It measures 50 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zapper use?
78 parts, built around the ATMEGA328P-AU, CH340C, TTP223-BA6 and MT3608. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zapper KiCad files?
From the hanebuechenes/ZapZap repository on GitHub, at the commit this page was made from: the board is hardware/KiCad/zapper.kicad_pcb and its schematic hardware/KiCad/EinAus.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zapper design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).