
Wiggle spine
gitter-badger/wiggleport
Modular I/O for multi-channel sound, light, and motion

ADAT Receiver is an open-source printed circuit board by hana, from the hana/ADAT2QuadI2S repository on GitHub. It is a 2-layer board of 52.1 × 26.7 mm with 21 parts on 25 nets, routed with 151 tracks and 44 vias.
It is built around the PLR135/T8, V1402 and PLT133/T. Its parts include 7 resistors, 5 capacitors, 5 connectors, 1 IC and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6 |
| 3 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C4, C5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 30p | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 47u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | PLR135/T | Photolink:PLx13xT | J2 |
| 1 | PLT133/T | Photolink:PLx13xT | J5 |
| 1 | SW_DIP_x03 | Button_Switch_SMD:SW_DIP_SPSTx03_Slide_6.7x9.18mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J1 |
| 1 | V1402 | Package_SO:SOP-24_7.5x15.4mm_P1.27mm | U1 |

gitter-badger/wiggleport
Modular I/O for multi-channel sound, light, and motion

PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…


freeDSP/freeDSPx-ADAT-IO-x4
The freeDSPx ADAT IO x4 is a digital IO expansion board for the freeDSP family. It provides 4 Lightpipe(I2S) inputs and 4 Lightpipe outputs via single Toslink Cable.




gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
It measures 52.1 × 26.7 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the PLR135/T8, V1402 and PLT133/T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hana/ADAT2QuadI2S repository on GitHub, at the commit this page was made from: the board is ADAT_Receiver.kicad_pcb and its schematic ADAT_Receiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask hana before reusing the design.