2 layers163 × 130 mm
Musashi60-revD
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
69 parts27
2 layers160 × 135 mm
Musashi60-revC wired
hamano/musashi6027Make example for this keyboard (after setting up your build environment):
- Size
- 160 × 135 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 53
- Pads
- 704
- Tracks, vias
- 1,143, 35
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Jun 2020
- Updated
- 19 Dec 2024
Overview
Musashi60-revC wired is an open-source printed circuit board by hamano, from the hamano/musashi60 repository on GitHub. It is a 2-layer board of 160 × 135 mm with 69 parts on 53 nets, routed with 1,143 tracks and 35 vias.
Its parts include 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
readme.mdMusashi60 - Open Hardware Keyboard
Overview
Musashi60 is open-hardware splitted keyboard.
- Keys: 60
- Layout: Ergonomic column-staggered
- All parts are available to procured or make yourself. see parts.
- Keyboard Maintainer: HAMANO Tsukasa
- Hardware Supported: The PCBs, controllers supported
- Hardware Availability: Links to where you can find this hardware
Make example for this keyboard (after setting up your build environment):
make musashi60:defaultSee the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Gallery
Parts list
- RP2024
- PCB
- case
- plate
- screw
Build guide
Comming soon...
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | D | foostan:D3_TH_SMD | D_A2, D_A3, D_A5, D_B1, D_B2, D_B3, D_B4, D_B5, D_C1, D_C2, D_C3, D_C4, D_C5, D_D1, D_D2, D_D3 +14 |
| 30 | SW_PUSH | local:CherryMX_Direct_Hotswap_Reversible | SW_A2, SW_A3, SW_A5, SW_B1, SW_B2, SW_B3, SW_B4, SW_B5, SW_C1, SW_C2, SW_C3, SW_C4, SW_C5, SW_D1, SW_D2, SW_D3 +14 |
| 2 | LOGO | local:musashi60-silk-384 | G_LOGO_B, G_LOGO_F |
| 2 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | OL1, OL1 |
| 1 | JP_LEFT | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP_LEFT1 |
| 1 | JP_RIGHT | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP_RIGHT1 |
| 1 | MJ-4PP-9 | foostan:MJ-4PP-9 | J1 |
| 1 | ProMicro_r | foostan:ProMicro_v2 | U1 |
| 1 | SW_PUSH | foostan:ResetSW | SW_RST1 |
More from hamano/musashi60
9- 2 layers160 × 140 mm
Musashi50-rev8-wired
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
68 parts27 - 2 layers155 × 135 mm
Musashi60
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
65 parts27 - 2 layers134 × 94 mm
RevF main left
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
62 parts27 - 2 layers134 × 94 mm
RevE main
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
61 parts27 - 2 layers75 × 72 mm
RevF thumb
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
26 parts27 - 2 layers81 × 28 mm
RevE thumb
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
14 parts27 - 2 layers78 × 33 mm
RevG thumb wired
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
14 parts27 - 2 layers62 × 31 mm
RevF thumb reversible
hamano/musashi60
Make example for this keyboard (after setting up your build environment):
11 parts27
Similar boards
- 2 layers117.3 × 54.5 mm
- 2 layers100 × 96 mm
Backlight
jackw01/scanlight
A better light source for scanning color negative film
69 parts397CERN-OHL-W-2.0 - 2 layers135.9 × 102.2 mm
Ergo42
Biacco42/Ergo42
7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards
69 parts218 - 2 layers104.1 × 71.1 mm
Minifp
eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.
69 parts139 - 2 layers90 × 140 mm
Drumkid
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
69 parts137 - 2 layers120 × 60 mm
Overglade Badges
KaiPereira/Overglade-Badges
NFC hackathon badges for the Overglade game jam in Singapore!
69 parts126 - 2 layers142 × 20 mm
DeskController
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
69 parts94BSD-3-Clause - 2 layers163.1 × 111.9 mm
Questions
How big is the Musashi60-revC wired PCB?
It measures 160 × 135 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Musashi60-revC wired use?
69 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Musashi60-revC wired KiCad files?
From the hamano/musashi60 repository on GitHub, at the commit this page was made from: the board is pcb/revC/musashi60-revC-wired.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Musashi60-revC wired design in my own project?
Its repository states no licence, so its author keeps all rights: ask hamano before reusing the design.