2 layers220 × 329.2 mm
Control Boards
nasa-jpl/open-source-rover
A build-it-yourself, 6-wheel rover based on the rovers on Mars!
148 parts9.8kApache-2.0
2 layers76.2 × 76.2 mm
Camboard
HALtheWise/eclectronics-project2- Size
- 76.2 × 76.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 121
- Pads
- 350
- Tracks, vias
- 1,288, 76
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Sep 2017
- Updated
- 15 Dec 2017
Overview
Camboard is an open-source printed circuit board by HALtheWise, from the HALtheWise/eclectronics-project2 repository on GitHub, published under the MIT licence. It is a 2-layer board of 76.2 × 76.2 mm with 60 parts on 121 nets, routed with 1,288 tracks and 76 vias.
It is built around the STM32F746VGT6, FT230XS-R and NX3215SA, with the PPTC102LFBN-RC among its other parts. Its parts include 22 resistors, 16 capacitors, 7 connectors, 5 diodes and 5 switches. It belongs with the STM32 boards of this library.
Main components
4
STM32F746VGT6
LQFP-100(14x14)-40℃~+85℃ 1.7V~3.6V 12bit 12bit 1MB 216MHz 32 Bit 320KB 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB ConvertersNX3215SA
SMD3215-2PSMD3215-2P New Arrivals ROHSNDKUncategorisedPPTC102LFBN-RC
插件,P=2.54mm-40℃~+105℃ 2 2.54mm 2.54mm 20P 250V 3A 8.51mm Phosphor bronze Square Hole Through Hole Tin 插件,P=2.54mm Female Headers ROHSSullins Connector SolutionsFemale Headers
README
README.mdeclectronics-project2
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitors_SMD:C_0603 | C4, C5, Cp1, Cp2, Cp3, Cp4, Cp5, Cp6 |
| 5 | 47.5K | Resistors_SMD:R_0603 | R3, R4, R5, R6, R7 |
| 5 | 499 | Resistors_SMD:R_0603 | R16, R17, R18, R19, R20 |
| 4 | 10K | Resistors_SMD:R_0603 | R8, R9, R10, R11 |
| 3 | 10k | Resistors_SMD:R_0603 | R15, R21, R22 |
| 3 | 1uF | Capacitors_SMD:C_0603 | C17, C18, Ca2 |
| 3 | LED-G | LEDs:LED_0805 | D1, D2, D3 |
| 3 | SW_DPDT_x2 | DPDT_switch:JS202011SCQN | SW1, SW4, SW5 |
| 2 | 0 | Resistors_SMD:R_0603 | R13, R14 |
| 2 | 2.2uF | Capacitors_SMD:C_0805 | C15, C16 |
| 2 | 30.1 | Resistors_SMD:R_0603 | R1, R2 |
| 2 | 4.7pF | Capacitors_SMD:C_0603 | C6, C7 |
| 2 | Conn_01x25_Female | Socket_Strips:Socket_Strip_Straight_1x25_Pitch2.54mm | J6, J7 |
| 2 | SW_Push | Buttons_Switches_SMD:SW_SPST_B3U-1000P | SW2, SW3 |
| 1 | 100 | Resistors_SMD:R_0603 | R12 |
| 1 | 10uF | Capacitors_SMD:C_0805 | C1 |
| 1 | Conn_ARM_JTAG_SWD_20 | 2x10_Female_Header:Socket_Strip_Straight_2x10_Pitch2.54mm | J4 |
| 1 | FT230XS | Housings_SSOP:SSOP-16_3.9x4.9mm_Pitch0.635mm | U3 |
| 1 | GS2 | Connectors:GS2 | J5 |
| 1 | LED-B | LEDs:LED_0805 | D4 |
| 1 | LED-R | LEDs:LED_0805 | D5 |
| 1 | MCP1703A-3302_SOT23 | TO_SOT_Packages_SMD:SOT-23 | U2 |
| 1 | Micro_SD_Card | uSD_card:114-00841-68 | J2 |
| 1 | NX3215SA | Crystals:Crystal_SMD_3215-2pin_3.2x1.5mm | Y2 |
| 1 | PPTC102LFBN-RC | 2x10_Female_Header:Socket_Strip_Straight_2x10_Pitch2.54mm | J3 |
| 1 | SG-310SCN | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm | Y1 |
| 1 | STM32F746VGT6 | Housings_QFP:LQFP-100_14x14mm_Pitch0.5mm | U1 |
| 1 | USB_microB_2040002-1 | USB_micro_b:USB_microB_2040002-1_alt | J1 |
Questions
How big is the Camboard PCB?
It measures 76.2 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Camboard use?
60 parts, built around the STM32F746VGT6, FT230XS-R, NX3215SA and PPTC102LFBN-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Camboard KiCad files?
From the HALtheWise/eclectronics-project2 repository on GitHub, at the commit this page was made from: the board is camboard/camboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Camboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers57.2 × 25.4 mm
- 2 layers229.9 × 111.8 mm
- 2 layers203.2 × 149.9 mm
- 2 layers77.5 × 40.6 mm
Link adapter
jkominek/piano-conversion
Hardware, and some firmware, for acoustic piano to MIDI controller conversion.
42 parts53 - 4 layers62 × 42 mm
- 4 layers65 × 56 mm
Copilot Lite
BayLibre/Copilot
Manage a DUT power and serial through a single USB port, no additional software required.
80 parts22MIT - 2 layers48.2 × 49.3 mm
Nixie pipe
tuna-f1sh/nixiepipe-hardware
Hardware design files and firmware for my Nixie Pipe modules
49 parts19