asmi84/kicad-projects39S7 Min Enet is an open-source printed circuit board by asmi84, from the asmi84/kicad-projects repository on GitHub, published under the MIT licence. It is a 4-layer board of 62 × 42 mm with 48 parts on 59 nets, routed with 878 tracks and 69 vias.
It is built around the DP83848JSQ, FT230XS-R and J1B1211CCD. Its parts include 21 resistors, 17 capacitors, 3 connectors, 2 ICs and 2 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C10, C11, C12, C14, C15 |
| 4 | 49.9 | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R18 |
| 4 | DNP | Resistor_SMD:R_0402_1005Metric | R3, R4, R5, R6 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C9, C13 |
| 3 | 2.2K | Resistor_SMD:R_0402_1005Metric | R7, R8, R11 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C8 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R19, R20 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | 47pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 680 | Resistor_SMD:R_0805_2012Metric | R12, R13 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.75K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 4.87K | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 600R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | Conn_02x15_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x15_P2.54mm_Vertical | J2 |
| 1 | DP83848J | Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm_ThermalVias | U2 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U1 |
| 1 | J1B1211CCD | my_parts:J1B1211CCD | J3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194_Horizontal | J1 |
| 1 | USB_RX | LEDs:LED_0805 | D1 |
| 1 | USB_TX | LEDs:LED_0805 | D2 |
The 47 most common of 48 parts.
It measures 62 × 42 mm and has 4 copper layers, 1.6 mm thick.
48 parts, built around the DP83848JSQ, FT230XS-R and J1B1211CCD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the asmi84/kicad-projects repository on GitHub, at the commit this page was made from: the board is S7_Min_Enet/S7_Min_Enet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
DvidMakesThings/HW_PDNode-600-Pro
The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.
Wierdwizard2587/Custom-Teensy-4.1-PCB-Design
Custom Designed MCU design based upon Teensy 4.1
iryek-rpi/pico-encoder
TCP/IP packet encoding terminal based on W5500-EVB-Pico and Raspberry Pi Pico W
msoe-vex/pcb-design
This repository is dedicated to storing files required for designing and creating PCB Boards
EggiEl/SpiCy-BEXUS
Cyanobacteria are among the oldest and most efficient photosynthetic organisms on planet Earth. They contribute 25% of the oxygen on Earth today and were crucial in forming our atmosphere in the early stages of Earth's…
letrend/UVen
UV irradiation system for enhanced photo-activation in living cells