

Water level project
IZTECH EEE PROJETS LECTURE
- Size
- 89.9 × 76 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 26
- Pads
- 114
- Tracks, vias
- 198, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 May 2026
- Updated
- 19 Sep 2026
Overview
Water level project is an open-source printed circuit board by halilyilmaz16, from the halilyilmaz16/EE316-ELECTRONICS-DESIGN-PROJECT repository on GitHub. It is a 2-layer board of 89.9 × 76 mm with 33 parts on 26 nets, routed with 198 tracks and 0 vias.
It is built around the LM358, 74LS74PC and LM393, with the NE555D among its other parts. Its parts include 16 resistors, 7 capacitors, 6 ICs and 3 connectors.
Main components
4LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip FlopsLM393
SOP-8-16V~16V 0℃~+70℃ 2 2.5mA 250nA 2V~36V 36V 5mV 5nA Fail-safe function Open-drain SOP-8 Comparators ROHSMSKSEMIComparatorsNE555D
SOIC-80℃~+70℃ 10mA 4.5V~16V SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
README
README.mdCapacitive Water Level Controller
An analog closed-loop water level control system designed and implemented for the EE 316 Electronic Design Project at İzmir Institute of Technology.
The system detects liquid-level variations using a custom cylindrical capacitive sensor. The sensor output is processed through phase detection, filtering, amplification, error generation, and PWM stages. The resulting PWM signal controls a submersible DC water pump through an L298N motor driver.
Key Features
- Custom cylindrical capacitive water-level sensor
- TLC555-based oscillator
- XOR-based phase detection
- RC filtering and LM358 signal amplification
- Adjustable reference water level
- PWM-based pump speed control
- Motor overcurrent protection
- LTspice simulation and real-world circuit testing
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R6, R8, R14, R15 |
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11, R12, R13 |
| 2 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C7 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R5 |
| 2 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C5 |
| 2 | 2.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 2 | 200k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R9 |
| 2 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1, J3 |
| 2 | LM358 | Package_DIP:DIP-8_W7.62mm | U2, U4 |
| 1 | 10nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 1 | 1nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 1uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
| 1 | 7486 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | 74LS74 | Package_DIP:DIP-14_W7.62mm | U5 |
| 1 | Conn_01x01_Pin | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J2 |
| 1 | LM393 | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | NE555D | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Piher_PC-16_Single_Vertical | RV1 |
Similar boards
- 2 layers100 × 100 mm

- 2 layers94.3 × 128.5 mm

- 2 layers157.5 × 25.4 mm

- 2 layers

Entrex Trapezoid Processor Board v37
ForgottenMachines/Entrex
The technologies documented here will include all like-kind systems manufactured by Nixdorf, Redifon, ROCC & Mera, all originally designed by Entrex Inc, Burlington, MA USA.
194 parts1 - 4 layers189.4 × 59.1 mm

- 2 layers73 × 38 mm

- 2 layers10 × 104 mm

Analog to pwm
adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections
51 partsGPL-3.0 - 2 layers231.1 × 106.7 mm

Questions
How big is the Water level project PCB?
It measures 89.9 × 76 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Water level project use?
33 parts, built around the LM358, 74LS74PC, LM393 and NE555D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Water level project KiCad files?
From the halilyilmaz16/EE316-ELECTRONICS-DESIGN-PROJECT repository on GitHub, at the commit this page was made from: the board is Water level project.kicad_pcb and its schematic Water level project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Water level project design in my own project?
Its repository states no licence, so its author keeps all rights: ask halilyilmaz16 before reusing the design.