2 layers116.8 × 99.7 mm
2 layers100 × 100 mm
Schematics and PCB layout for my TPC65 single-board computer
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 88
- Pads
- 338
- Tracks, vias
- 875, 113
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Oct 2020
- Updated
- 13 Nov 2020
Overview
Tpc65 is an open-source printed circuit board by halfburnttoast, from the halfburnttoast/TPC65_Hardware repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 100 × 100 mm with 46 parts on 88 nets, routed with 875 tracks and 113 vias.
It is built around the 74LS00SC and L7805. Its parts include 12 capacitors, 8 resistors, 7 ICs, 6 diodes and 6 connectors. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C6, C7, C8, C9, C11, C12 |
| 4 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C3, C4, C10 |
| 3 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R6, R7 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4, R8 |
| 2 | D | Diode_THT:D_T-1_P5.08mm_Horizontal | D4, D5 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D3 |
| 2 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q3 |
| 2 | WD65C22 | Package_DIP:DIP-40_W15.24mm_Socket | U6, U7 |
| 1 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm_Socket | U2 |
| 1 | 3.3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm_Socket | U4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D6 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220F-3_Horizontal_TabDown | U3 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | LOGO | hoot:hoot | G*** |
| 1 | MASTER CLOCK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | PORTA | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J6 |
| 1 | PORTB | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J2 |
| 1 | PORTC | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J5 |
| 1 | PORTD | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J4 |
| 1 | POWER IN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Q_PNP_BCE | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2 |
| 1 | SD_CARD | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | UM61256A | Package_DIP:DIP-28_W7.62mm_Socket | U5 |
| 1 | WD65C02 | Package_DIP:DIP-40_W15.24mm_Socket | U1 |
Similar boards
- 2 layers99.1 × 99.1 mm
Plusd
alvaroalea/plusD-clone
Schematic of a clone of the Disk Interface +D for the ZX Spectrum
69 parts25 - 2 layers213.4 × 130.8 mm
Issue 4
iansbremner/ZX-Spectrum-Issue-4B-KiCAD
Recreation of the ZX Spectrum Issue 4B board in KiCAD
199 parts22 - 2 layers183.9 × 111.3 mm
- 2 layers99.1 × 99.1 mm
- 2 layers99.7 × 149.9 mm
- 2 layers213.1 × 130 mm
ZX Spectrum i2
liveboxandy/ZX-Spectrum-48K-Issue-2
KiCAD created files for the ZX Spectrum 48K Issue 2 designed by Sinclair Research Ltd
199 parts3CC0-1.0 - 2 layers90 × 70 mm
Ps2 mouse to serial port adapter in a box
knightfox75/PS2_Mouse_to_Serial_Port
An Arduino-based converter for connecting a PS/2 mouse to a serial port.
28 parts1MIT
Questions
How big is the Tpc65 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tpc65 use?
46 parts, built around the 74LS00SC and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tpc65 KiCad files?
From the halfburnttoast/TPC65_Hardware repository on GitHub, at the commit this page was made from: the board is tpc65.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tpc65 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).