2 layers187.2 × 26.6 mm
2 layers145.7 × 109.5 mm
Glup little
Haf0/Glup1why glup? dunno, the name is not fixed but that's the name that I just came out with hehhe
- Size
- 145.7 × 109.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 44
- Pads
- 760
- Tracks, vias
- 1,496, 113
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Aug 2023
- Updated
- 13 Sep 2023
Overview
Glup little is an open-source printed circuit board by Haf0, from the Haf0/Glup repository on GitHub. It is a 2-layer board of 145.7 × 109.5 mm with 50 parts on 44 nets, routed with 1,496 tracks and 113 vias.
Its parts include 21 diodes, 21 switches, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdGlup
Glup is split keyboard 3x6 with 3 thumb cluster that support Choc and MX,and reversible pcb there's 2 version of glup, big and little glup, big without snapable pcb and little with snappable pcb
why glup? dunno, the name is not fixed but that's the name that I just came out with hehhe
WARNING!!!!
Untested board, please use it with your own risk!! and I need to fix the spacing
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | D | kora:D3_TH_SMD | D1, D2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +5 |
| 21 | SW_PUSH | lily:MX_Choc_Hotswap | SW1, SW2, SW3, SW4, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21 +5 |
| 5 | MOUNT_HOLE | kbd:M2_Hole_NPTH_Outside | MH1, MH2, MH3, MH4, MH5 |
| 1 | MJ-4PP-9 | lily:TRRS_JACK_MJ4PP9 | J2 |
| 1 | ProMicro | lily:ProMicro_rev2 | U1 |
| 1 | SW_PUSH | lily:TACT_SWITCH_TVBP06 | RSW1 |
Questions
How big is the Glup little PCB?
It measures 145.7 × 109.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Glup little use?
50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Glup little KiCad files?
From the Haf0/Glup repository on GitHub, at the commit this page was made from: the board is little/Glup-little.kicad_pcb and its schematic big/Glup-big.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Glup little design in my own project?
Its repository states no licence, so its author keeps all rights: ask Haf0 before reusing the design.
Similar boards
- 2 layers45.7 × 25.9 mm
- 2 layers21 × 31.5 mm
- 2 layers42 × 32.5 mm
Lipoboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
50 parts915 - 2 layers80 × 109.5 mm
NucDeck Right Controller PCB - Rev 1.2
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
50 parts561CERN-OHL-S-2.0 - 2 layers101 × 31.5 mm
- 2 layers123.9 × 94.4 mm
- 2 layers50 × 25 mm
Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223