2 layers299 × 82.5 mm
PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
663 parts915
2 layers91.5 × 99.6 mm
Cz18-badge
hackzone/cz18-badge2Event badge for CampZone 2018
- Size
- 91.5 × 99.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 34
- Pads
- 162
- Tracks, vias
- 1,011, 72
- Pours
- 32
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 May 2018
- Updated
- 11 Aug 2018
Overview
Cz18-badge is an open-source printed circuit board by hackzone, from the hackzone/cz18-badge repository on GitHub. It is a 2-layer board of 91.5 × 99.6 mm with 37 parts on 34 nets, routed with 1,011 tracks and 72 vias.
It is built around the SK6812. Its parts include 8 capacitors, 8 diodes, 4 connectors, 4 switches and 2 ICs. It belongs with the lEDs and displays boards of this library.
Main components
1Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uf (opt.) | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C3, C4, C5, C6, C7 |
| 5 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D2, D4, D5, D6, D7 |
| 2 | Buzzer | Buzzers_Beepers:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1, BZ2 |
| 1 | #Badgelife Shitty AddOn (opt.) | ShittyAddOn:Badgelife-Shitty-2x2 | X1 |
| 1 | 100uf (opt.) | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 10k | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 433MHz RF | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D3 |
| 1 | 433MHz Receiver | Sensors:RF_Receiver_433_MHz | RF2 |
| 1 | 433MHz Transmitter | Sensors:RF_Transmitter_433_MHz | RF1 |
| 1 | 940nm | LEDs:LED_D5.0mm | D8 |
| 1 | AA Battery holder silkscreen | BatteryHolder:AA_Battery_holder_silkscreen | BATT |
| 1 | Arduino Nano v3.x | ArduinoNanoCustom:Arduino_Nano | A1 |
| 1 | CHQ1838 | Opto-Devices:IRReceiver_Vishay_MOLD-3pin | U1 |
| 1 | Dev breakout (opt.) | Pin_Headers:Pin_Header_Straight_2x15_Pitch2.54mm | J1 |
| 1 | GND | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J3 |
| 1 | Infrared | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | LEARN | Buttons_Switches_THT:SW_PUSH_6mm_h4.3mm | SW3 |
| 1 | LEDS OUT | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J4 |
| 1 | LOGO | vector-kong:Tin | TIN |
| 1 | LOGO | vector-kong:Silkscreen | SILK |
| 1 | MODE | Buttons_Switches_THT:SW_PUSH_6mm_h4.3mm | SW1 |
| 1 | MountingHole_4.3mm_M4_Pad_Via | Mounting_Holes:MountingHole_4.3mm_M4_Pad_Via | |
| 1 | NRF24L01 (opt.) | RF_Modules:nRF24L01_Breakout | U2 |
| 1 | PLAY | Buttons_Switches_THT:SW_PUSH_6mm_h4.3mm | SW4 |
| 1 | SLOT | Buttons_Switches_THT:SW_PUSH_6mm_h4.3mm | SW2 |
| 1 | VCC (max 5V) | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J2 |
Similar boards
- 4 layers95 × 95 mm
Openmicro
conol-ai/openmicrokbd
Open-source recreation of OpenAI's Codex Micro macropad — PCB written in CoHDL, an AI-native hardware description language. Rust firmware (embassy) + companion app (makepad). MIT licensed. https://openmicrokbd.org
88 parts154MIT - 2 layers312.5 × 122.3 mm
- 2 layers140.1 × 121.8 mm
- 2 layers187.9 × 127.2 mm
Dya panelized
cormoran/dya-dash-keyboard
DYA Dash portable wireless split keyboard with 25mm trackball
269 parts57CC-BY-4.0 - 2 layers145 × 145 mm
Neofighter
w4ilun/neofighter
A MIDI controller using arcade buttons with RGB lighting effects
111 parts51 - 2 layers176 × 189.6 mm
8x8
miliar/saiboard
An open-source, wooden electronic Go board that integrates with KataGo.
222 parts48GPL-3.0 - 6 layers128 × 128 mm
Emberone
256foundation/emberone00-pcb
KiCAD design files for the emberOne/00 hashboard
395 parts45CERN-OHL-S-2.0
Questions
How big is the Cz18-badge PCB?
It measures 91.5 × 99.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cz18-badge use?
37 parts, built around the SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cz18-badge KiCad files?
From the hackzone/cz18-badge repository on GitHub, at the commit this page was made from: the board is hardware/cz18_badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cz18-badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask hackzone before reusing the design.