4 layers100 × 100 mm
ETH OPAMP DCMI FSMC CAN ENCODER CS1000
DanielMartensson/STM32-Ethernet-Camera
PCB board with camera and ethernet connection + CAN-bus
144 parts16MIT
2 layers100 × 100 mm
Hardware design files for the hackwinkel badge.
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 61
- Pads
- 484
- Tracks, vias
- 1,338, 194
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Aug 2020
- Updated
- 23 Aug 2020
Overview
Badge is an open-source printed circuit board by hackwinkel, from the hackwinkel/badge-hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 152 parts on 61 nets, routed with 1,338 tracks and 194 vias.
It is built around the LM1117-3.3 and BC847. Its parts include 84 diodes, 32 resistors, 18 ICs, 10 capacitors and 2 transistors. It belongs with the lEDs and displays boards of this library.
Main components
2
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdbadge-hardware
Hardware design files for the hackwinkel badge.
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | mled | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D2, D10, D10, D11, D11, D12, D12, D17, D17, D18, D18, D19, D19, D20, D20 +26 |
| 42 | nled | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D1, D13, D13, D14, D14, D15, D15, D16, D16, D21, D21, D22, D22, D23, D23 +26 |
| 16 | 10k | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R2, R3, R3, R4, R4, R5, R5, R6, R6, R7, R7, R8, R8, R16, R16 |
| 16 | 22 | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R9, R9, R10, R10, R11, R11, R12, R12, R13, R13, R14, R14, R15, R15, R17, R17 |
| 4 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2, C2, C4, C4 |
| 4 | switch | badge:button | U3, U3, U5, U5 |
| 2 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C1, C1 |
| 2 | 10u | LED_SMD:LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C3, C3 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C5, C5 |
| 2 | 2jumpers | badge:2jumpers | U7, U7 |
| 2 | 3jumpers | badge:3jumpers | U8, U8 |
| 2 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q3, Q3 |
| 2 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2, U2 |
| 2 | digijoy | badge:digijoy | U4, U4 |
| 2 | ftdi | badge:dcon | j1, j1 |
| 2 | li-ion | badge:powconn | B1, B1 |
| 2 | switch | badge:switch | U1, U1 |
| 2 | tft | badge:tft | U9, U9 |
| 2 | wrover | badge:wrover | U6, U6 |
The 150 most common of 152 parts.
Questions
How big is the Badge PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Badge use?
152 parts, built around the LM1117-3.3 and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Badge KiCad files?
From the hackwinkel/badge-hardware repository on GitHub, at the commit this page was made from: the board is KiCAD_PCB/badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Badge design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers147.3 × 95.3 mm
Nixie proj conflict-20171112-163801
dm2lct/tlnixie
PCB files for the Turmlabor nixie clock 2.0
117 parts11GPL-3.0 - 4 layers60 × 106.5 mm
- 2 layers
- 2 layers176 × 100 mm
SmartDesk v1p0
daverowntree/SmartDesk
I open sourced a design I made a few years back for a non-paying client. Use it as you see fit!
190 parts - 2 layers31.1 × 33 mm
- 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers130 × 80 mm
