
Power control pcb
HacklabJKL/sergei_cnc2
Second version of Hacklab's custom built CNC machine

Second version of Hacklab's custom built CNC machine
Motor driver is an open-source printed circuit board by HacklabJKL, from the HacklabJKL/sergei_cnc2 repository on GitHub. It is a 2-layer board of 50 × 50 mm with 87 parts on 54 nets, routed with 687 tracks and 77 vias.
It is built around the SY8502FCC, LTV-356T and TLP2270, with the SS210, BAT54W and SMAJ13A among its other parts. Its parts include 32 resistors, 23 capacitors, 9 diodes, 7 ICs and 4 transistors. It belongs with the robots and motor control boards of this library.
This repository contains design files for Hacklab Jyväskylä's CNC machine project. The machine is built out of existing linear assemblies that have been donated to us, and as such it is not readily reproducible. But some of the modules may be useful and in any case this repository contains information for future maintenance of the machine.
The machine design is a compromise between router and mill designs. In general router-type CNC machines are more useful for our typical projects, as they have larger work area for flat stock. But in the same time it would be desirable for the machine to be sturdy enough to cut mild steel at reasonable speeds.
The basic design is similar to fixed gantry routers or a portal milling machine. X axis ballscrew assembly moves up and down on two Z axis columns. Y axis moves the table.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R9, R10, R14, R20, R21, R25 |
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6, C9, C11, C12, C17, C22, C23 |
| 6 | 1µF/100V | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5, C14, C15, C16 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C8, C10, C13 |
| 4 | 51 | Resistor_SMD:R_0603_1608Metric | R26, R27, R29, R30 |
| 4 | FDD86381 | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2, Q3, Q4 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | SS210 | Diode_SMD:D_SMA | D4, D5, D6, D7 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R3, R16 |
| 3 | 1nF | Capacitor_SMD:C_0603_1608Metric | C18, C19, C20 |
| 3 | 20k | Resistor_SMD:R_0603_1608Metric | R17, R18, R22 |
| 3 | 47k | Resistor_SMD:R_0603_1608Metric | R12, R13, R19 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric | R28, R31 |
| 2 | 100µF | motor_driver:CP_Radial_D10.0mm_P5.00mm_P7.50mm | C1, C2 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R11, R24 |
| 2 | L6393 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U5, U6 |
| 2 | LTV-356T | Package_SO:SO-4_4.4x3.6mm_P2.54mm | U3, U7 |
| 1 | 0.05 | motor_driver:Shunt_2512 | R15 |
| 1 | 100uH | Inductor_SMD:L_Bourns-SRN4018 | L1 |
| 1 | 11k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 12V | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7 | Resistor_SMD:R_0805_2012Metric | R32 |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | 680pF | Capacitor_SMD:C_0805_2012Metric | C21 |
| 1 | BAT54W | Diode_SMD:D_SOD-123 | D8 |
| 1 | Control | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-5_1x05_P2.54mm_Horizontal | J2 |
| 1 | DLW5ATN111 | motor_driver:DLW5ATN111 | FL1 |
| 1 | GREEN | motor_driver:LED_0805_Reverse | D2 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | Motor | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | N/A | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | NTC 10k | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | Power | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | RED | motor_driver:LED_0805_Reverse | D3 |
| 1 | SMAJ13A | Diode_SMD:D_SMA | D9 |
| 1 | SMAJ51A | Diode_SMD:D_SMA | D1 |
| 1 | SY8502 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm | U1 |
| 1 | TLP2270 | Package_SO:SOIC-8_7.5x5.85mm_P1.27mm | U4 |

HacklabJKL/sergei_cnc2
Second version of Hacklab's custom built CNC machine



HacklabJKL/sergei_cnc2
Second version of Hacklab's custom built CNC machine



sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller

fullyautomated/tinypol
48-V Input Affordable 1.2-A Output Point-of-Load DC/DC Converter

Teslafly/Moxie_drive
A motor drive based off https://github.com/vedderb/bldc-hardware capable of 75v and 100a continuous for silly electric vehicles





Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
87 parts, built around the SY8502FCC, LTV-356T, TLP2270 and SS210. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HacklabJKL/sergei_cnc2 repository on GitHub, at the commit this page was made from: the board is electronics/motor_driver/motor_driver.kicad_pcb and its schematic electronics/braking_shunt/braking_shunt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask HacklabJKL before reusing the design.