
MoxiE Control board
Teslafly/Moxie_drive
A motor drive based off https://github.com/vedderb/bldc-hardware capable of 75v and 100a continuous for silly electric vehicles

A motor drive based off https://github.com/vedderb/bldc-hardware capable of 75v and 100a continuous for silly electric vehicles
MoxiE power stage is an open-source printed circuit board by Teslafly, from the Teslafly/Moxie_drive repository on GitHub, published under the MIT licence. It is a 4-layer board of 100 × 60 mm with 147 parts on 70 nets.
It is built around the MIC4605-1YM-TR, SY8502FCC and TPH2R608NH,L1Q. Its parts include 55 resistors, 48 capacitors, 18 transistors, 8 connectors and 7 ICs. It belongs with the robots and motor control boards of this library.
A motor drive based off https://github.com/vedderb/bldc-hardware capable of 75v and 100a continuous for silly electric vehicles
design: 12-60v 120-150 continuous phase amps based off the vesc 6. has phase shunts
Forged from the remminants of the oppressed vesc 6. Raised on a diet of endless sphere and equals zero posts. destined for a fight to the death in hilariously brutal Power Wheels Racing Series. I give to you, the MoxiE-Drive.
This the Hardware for my derivitive of the Vesc-project.



Have a look at this post for a tutorial on how to get started: http://vedder.se/2015/01/vesc-open-source-esc/
Made with KiCad 5
wonderfulfailure.wordpress.com
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 100v_1.0uF | pkl_dipol:C_1206 | C302, C303, C304, C305, C306, C307, C308, C309, C311, C402, C403, C404, C405, C406, C407, C408 +11 |
| 18 | 10R | pkl_dipol:R_0603 | R303, R304, R305, R306, R307, R308, R403, R404, R405, R406, R407, R408, R503, R504, R505, R506 +2 |
| 18 | TPH2R608NH,L1Q | moxie-drive-custom:SOP8_Advance | Q301, Q302, Q303, Q304, Q305, Q306, Q401, Q402, Q403, Q404, Q405, Q406, Q501, Q502, Q503, Q504 +2 |
| 7 | 1uf | pkl_dipol:C_0603 | C206, C301, C310, C401, C410, C501, C510 |
| 6 | 1.0mΩ | pkl_dipol:R_0603 | R309, R312, R409, R412, R509, R512 |
| 6 | 2k2 | pkl_dipol:R_0402 | R301, R302, R401, R402, R501, R502 |
| 5 | 2k2 | pkl_dipol:R_0603 | R314, R414, R514, R604, R606 |
| 5 | 39k | pkl_dipol:R_0603 | R313, R413, R513, R603, R605 |
| 5 | 470uf 80v | Mas_custom_parts:CP_Radial_D12.5mm_P5.00mm | C101, C102, C103, C104, C105 |
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | MK103, MK104, MK105, MK106 |
| 3 | 0.5mΩ | moxie-drive-custom:R_2512_shunt_vishay | R310, R410, R510 |
| 3 | 1.0mΩ | moxie-drive-custom:R_2512_shunt_vishay | R311, R411, R511 |
| 3 | 2.2u | pkl_dipol:C_0402 | C315, C415, C515 |
| 3 | ACS711 | Mas_custom_parts:ACS711KEX | U302, U402, U502 |
| 3 | MIC4605-1YMT | moxie-drive-custom:TDFN2525-10ld | U301, U401, U501 |
| 3 | Net-Tie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT301, NT401, NT501 |
| 3 | PHASE_3 | Mas_custom_parts:large_wire_pad | P101, P102, P105 |
| 2 | 10k | pkl_dipol:R_0402 | R202, R601 |
| 2 | Conn_01x02 | Connectors_JST:JST_PH_B2B-PH-K_02x2.00mm_Straight | J201, J202 |
| 2 | Mounting_Hole | Mounting_Holes:MountingHole_3.2mm_M3 | MK101, MK102 |
| 1 | 0.1uf | pkl_dipol:R_0402 | C203 |
| 1 | 0.1uf | pkl_dipol:C_0402 | C204 |
| 1 | 0.1uf_100V | pkl_dipol:C_0603 | C202 |
| 1 | 100k | pkl_dipol:R_0402 | R101 |
| 1 | 100k | pkl_dipol:R_0603 | R201 |
| 1 | 100uf 25v | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C207 |
| 1 | 100uh 2.5A | Inductors_SMD:L_12x12mm_h8mm | L201 |
| 1 | 100v 200ma | Diodes_SMD:D_SOD-323 | D201 |
| 1 | 10k ntc | pkl_dipol:R_0402 | R602 |
| 1 | 1k | pkl_dipol:R_0402 | R102 |
| 1 | 2.2k | pkl_dipol:R_0402 | R205 |
| 1 | 2.2uF_100V | pkl_dipol:C_1206 | C201 |
| 1 | 20k | pkl_dipol:R_0402 | R204 |
| 1 | 2MΩ | pkl_dipol:R_0603 | R203 |
| 1 | 4.7nf | pkl_dipol:C_0402 | C205 |
| 1 | Conn_02x13_Counter_Clockwise | moxie-drive-custom:FLE-113-01-G-DV | J101 |
| 1 | PHASE_1 | Mas_custom_parts:large_wire_pad | P103 |
| 1 | PHASE_2 | Mas_custom_parts:large_wire_pad | P104 |
| 1 | SY8502 | Mas_custom_parts:SO8-E | U201 |

Teslafly/Moxie_drive
A motor drive based off https://github.com/vedderb/bldc-hardware capable of 75v and 100a continuous for silly electric vehicles

reivax-boucoi/PCB_Kicad
Repo for all my home projects involving PCBs developped with Kicad


fullyautomated/tinypol
48-V Input Affordable 1.2-A Output Point-of-Load DC/DC Converter

HacklabJKL/sergei_cnc2
Second version of Hacklab's custom built CNC machine

Teslafly/Moxie_drive_mini_drv
A motor drive based off https://github.com/vedderb/bldc-hardware using the drv8353 and toshiba fets



bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
It measures 100 × 60 mm and has 4 copper layers, 1.6 mm thick.
147 parts, built around the MIC4605-1YM-TR, SY8502FCC and TPH2R608NH,L1Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Teslafly/Moxie_drive repository on GitHub, at the commit this page was made from: the board is Moxie_Power_stage/MoxiE_power_stage.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).