

PeugeoutTypeCDisplayHack
Changing LCD crystal to a broken Peugeot 3008 display.
- Size
- 54 × 26 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 93
- Pads
- 189
- Tracks, vias
- 337, 85
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Oct 2020
- Updated
- 20 Mar 2021
Overview
PeugeoutTypeCDisplayHack is an open-source printed circuit board by hackingchips, from the hackingchips/Peugeot-3008-Display repository on GitHub, published under the MIT licence. It is a 2-layer board of 54 × 26 mm with 32 parts on 93 nets, routed with 337 tracks and 85 vias.
It is built around the CY8C4245AXI-483 and LM1117-3.3. Its parts include 13 capacitors, 11 resistors, 4 connectors, 2 ICs and 2 switches. It belongs with the lEDs and displays boards of this library.
Main components
2CY8C4245AXI-483
TQFP-44-40℃~+85℃ 1.71V~5.5V 12bit 32 Bit 32KB 36 48MHz 4KB ARM Cortex-M0 Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSInfineon TechnologiesMicrocontrollers (MCU/MPU/SOC)LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdRepairing Peugeot 3008 display.
This repository is about changing the LCD crystal of my Peugeot 3008 multifunction display.
If you want more information go the following links:
- http://www.hackingchips.com/2020/09/reparacion-de-display-peugeot-3008.html
- http://www.hackingchips.com/2020/09/reparacion-de-display-peugeot-3008_22.html
- http://www.hackingchips.com/2020/09/reparacion-de-display-peugeot-3008_23.html
- http://www.hackingchips.com/2020/09/reparacion-de-display-peugeot-3008_25.html
- http://www.hackingchips.com/2020/09/reparacion-de-display-peugeot-3008_26.html
- http://www.hackingchips.com/2020/10/reparacion-de-display-peugeot-3008.html
Repository.
- Docs: Datasheets and notes.
- Firmware/PeugeotDisplay4245: Firmware for Cypress PSoC CY8C4245 (PSoC Creator 4.3 project).
- Hardware/PeugeotTypeCDisplayHack: Kicad project (schematic & pcb board).
- Mechanical: 3D models.
- NewestArchives_xxx_date_xxx: Latest binary & docs.
Thanks to Peter Pinter (morcibacsi). His project PSAWifiDisplayControl (https://github.com/morcibacsi/PSAWifiDisplayControl) saved me a lot of work.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | PeugeoutTypeCDisplayHack:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C7, C9, C10, C11 |
| 4 | 1K | PeugeoutTypeCDisplayHack:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R5 |
| 4 | 2K | PeugeoutTypeCDisplayHack:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R7, R8, R9 |
| 3 | 10uF | PeugeoutTypeCDisplayHack:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C3, C8 |
| 2 | 4u7 | PeugeoutTypeCDisplayHack:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12, C13 |
| 2 | F.Use | PeugeoutTypeCDisplayHack:PinHeader_1x02_P2.00mm_Vertical | S1, S2 |
| 1 | 100nf | PeugeoutTypeCDisplayHack:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 10M | PeugeoutTypeCDisplayHack:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 10nF | PeugeoutTypeCDisplayHack:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 1 | 1uF/25 | PeugeoutTypeCDisplayHack:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5 |
| 1 | 4K7 | PeugeoutTypeCDisplayHack:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | ??? | PeugeoutTypeCDisplayHack:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R11 |
| 1 | Backlight | PeugeoutTypeCDisplayHack:PinHeader_1x02_P2.00mm_Vertical | J4 |
| 1 | CY8C4245AXI-483 | PeugeoutTypeCDisplayHack:TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | Conn_01x05 | PeugeoutTypeCDisplayHack:PinHeader_1x05_P1.27mm_Vertical | J2 |
| 1 | ER-CON30HB-1 | PeugeoutTypeCDisplayHack:ER-CON30HB-1 | J3 |
| 1 | LM1117-3.3 | PeugeoutTypeCDisplayHack:SOT-223-3_TabPin2 | U1 |
| 1 | PeugeotPCBConnector | PeugeoutTypeCDisplayHack:PeugeotPCBConnector | J1 |
Similar boards
- 2 layers99 × 91 mm

- 2 layers87 × 40 mm

- 2 layers79.4 × 58.1 mm

WeatherStation
farm2440/WeatherStationKiCAD
WeatherStation project. WiFi sensors are sending data using multicast in the local network. A RaspberryPi board is receiving multicasts and sending data to MQTT broker via Internet. Also data is sent to APRS.
35 parts - 2 layers140 × 40 mm

- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers52.5 × 36.6 mm

ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers95.2 × 57.2 mm

- 2 layers189.5 × 204.9 mm

SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0
Questions
How big is the PeugeoutTypeCDisplayHack PCB?
It measures 54 × 26 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PeugeoutTypeCDisplayHack use?
32 parts, built around the CY8C4245AXI-483 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PeugeoutTypeCDisplayHack KiCad files?
From the hackingchips/Peugeot-3008-Display repository on GitHub, at the commit this page was made from: the board is Hardware/PeugeoutTypeCDisplayHack/PeugeoutTypeCDisplayHack.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PeugeoutTypeCDisplayHack design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).