
E003-capstan
KP1533TM2/e003-capstan
Блок управления ведущим двигателем Олимпа 003 с ФАПЧ, основанный на БУВД самодельного магнитофона TK-140 leoniv

Repository for å organisere arkademaskin-prosjektgruppe
Capacitive touch demo is an open-source printed circuit board by hackerspace-ntnu, from the hackerspace-ntnu/arkademaskin repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 19 parts on 30 nets, routed with 224 tracks and 23 vias.
It is built around the ATMEGA168-20AU and BS170. Its parts include 8 capacitors, 6 resistors, 2 connectors, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
An arcade machine based on a piano.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2, R3, R4, R5, R6 |
| 4 | capacitive-pad | pads-cap-lib:capacitive-pad | C4, C6, C8, C10 |
| 2 | 20pF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | 16MHz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | 1n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C11 |
| 1 | ATmega168-20AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | BS170 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | Conn_01x05_Male | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | capacitive-pad | pads-cap-lib:capacitive-pad-small | C13 |

KP1533TM2/e003-capstan
Блок управления ведущим двигателем Олимпа 003 с ФАПЧ, основанный на БУВД самодельного магнитофона TK-140 leoniv


kikiosvetnik/rpm-meter-with-atmel168
PCB and Software project of RPM meter using atmega168 and custom pcb

/Arduino%20Nano%20(Clone).kicad_pcb.jpg?size=s&soon)
Princediscjalpha/DIY-PCB-Projects
I am creating this repository that will include most of PCB Board designs and layouts that are mostly used for hobby purposes and are very helpful to understand the industrial projects and their working as well.



It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the ATMEGA168-20AU and BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the hackerspace-ntnu/arkademaskin repository on GitHub, at the commit this page was made from: the board is capacitive-touch/capacitive-touch-demo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).