Skip to the content
2 layers116.5 × 64.5 mmPhoenix v1, the printed circuit board in 3D

tube furnace

Size
116.5 × 64.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
47
Pads
102
Tracks, vias
111, 148
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Feb 2025
Updated
20 Oct 2025

Overview

Phoenix v1 is an open-source printed circuit board by hacker-fab, from the hacker-fab/phoenix repository on GitHub, published under the MIT licence. It is a 2-layer board of 116.5 × 64.5 mm with 20 parts on 47 nets, routed with 111 tracks and 148 vias.

It is built around the ESP32-S3-DEVKITC-1-N8. Its parts include 5 resistors, 3 diodes, 2 capacitors, 2 ICs and 2 connectors. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

phoenix

Phoenix is a tube furnace used for thermal oxidation and annealing.

It uses PID control to follow custom temperature profiles and works on both MicroPython on the ESP32 and a simulated Python desktop environment.


Fig 1. Tube furnace in action

Fig 2. Simulated PID following a heat profile

Fig 3. Controlling ramp rate to prevent thermal shock

Python setup

bash
python3 -m venv .venv
source .venv/bin/activate
pip install -r requirements.txt

Micropython setup

Install micropython

bash
https://github.com/micropython/micropython/tree/master/ports/unix#readme

Install typing

bash
micropython -m mip install github:josverl/micropython-stubs/mip/typing.mpy

Install udataclasses

bash
cd ~/.micropython/lib
# extract src/udataclasses
git clone https://github.com/dhrosa/udataclasses.git tmp
mv tmp/src/udataclasses .
rm -rf tmp

Flash code

text
esptool erase-flash
esptool --baud 460800 write-flash 0 images/ESP32_GENERIC_S3-SPIRAM_OCT-20250809-v1.26.0.bin

mpremote
mpremote connect /dev/ttyUSB0 fs cp main.py :
  • use the UART port (left side) for flashing
  • use the USB port (right side) when using mpremote

Parts

20
QtyValueFootprintReferences
3220Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R3
3LEDDiode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1, D2, D3
21uFCapacitor_SMD:C_0805_2012MetricC1, C2
24.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R5
1Conn_01x09_Socket!footprints:MAX31856_HEADERJ2
1ESP32-S3-DevKitCPCM_Espressif:ESP32-S3-DevKitCU1
1LOGO!footprints:HF_logoG***
1NHD-C0220BIZDisplay:NHD-C0220BiZU2
1RotaryEncoder_Switch!footprints:PEC164120FS0012SW1
1Screw_Terminal_01x02phoenix_footprints:TE_282837-2J1

The 16 most common of 20 parts.

More from hacker-fab/phoenix

2
  • 2 layers115 × 65 mmPhoenix v2, the printed circuit board in 3D

    Phoenix v2

    hacker-fab/phoenix

    tube furnace

    41 parts3MIT

Similar boards

  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers129.9 × 63.6 mmTraeger rev 2.3.0.kicad pro, the printed circuit board in 3D

    Traeger rev 2.3.0.kicad pro

    jazzmonger/Traeger-PID-Controller

    Traeger Smoker/Grill Controller based on an

    45 parts36
  • 2 layers168.8 × 78.9 mmGameboy3, the printed circuit board in 3D

    Gameboy3

    ohasanov-hbrw/tribit32-advanced

    A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!

    61 parts8
  • 2 layers134.6 × 49.5 mmMem esp, the printed circuit board in 3D

    Mem esp

    fread/visvitalis

    A very simple modular relay computer

    71 parts7
  • 2 layers90 × 102 mmPL Toon, the printed circuit board in 3D

    PL Toon

    pl-toon/pl-toon-codes

    PL-TOON material

    39 parts7
  • 2 layers119.4 × 98.9 mmPCB Pami, the printed circuit board in 3D

    PCB Pami

    FIPATECH/CDFR26_PAMI

    Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

    25 parts6
  • 2 layers76.2 × 40.6 mmEspressifESP32toExpressAdaptor, the printed circuit board in 3D

    EspressifESP32toExpressAdaptor

    dnhutchins/ETC_Express_Reverse_Eng

    The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.

    3 parts5
  • 2 layersE ink multi sensor, the printed circuit board in 3D

    E ink multi sensor

    heckler/esphome-device-configs

    Configuration definitions for local ESPHome files

    11 parts4Apache-2.0

Questions

How big is the Phoenix v1 PCB?

It measures 116.5 × 64.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Phoenix v1 use?

20 parts, built around the ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Phoenix v1 KiCad files?

From the hacker-fab/phoenix repository on GitHub, at the commit this page was made from: the board is schematics/phoenix_v1/phoenix_v1.kicad_pcb and its schematic schematics/phoenix_v0/phoenix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Phoenix v1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).