2 layers16.5 × 20.3 mm
LSM6DSV Breakout
HackableElectronics/LSM6DSV-Breakout
ST's LSM6DSV 6DoF IMU Breakout with Qwiic connection system
16 parts2GPL-3.0
2 layers12.4 × 21.1 mm
MMC5603-Module
HackableElectronics/MMC5603-ModuleMMC5603 AMR sensor module using STEMMA QT / Qwiic
- Size
- 12.4 × 21.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 4
- Pads
- 30
- Tracks, vias
- 50, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Jan 2024
- Updated
- 18 Feb 2025
Overview
MMC5603-Module is an open-source printed circuit board by HackableElectronics, from the HackableElectronics/MMC5603-Module repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 12.4 × 21.1 mm with 10 parts on 4 nets, routed with 50 tracks and 18 vias.
It is built around the MMC5603NJ and AFC10-S04QCA-00. Its parts include 3 connectors, 2 capacitors, 2 resistors and 1 IC. It belongs with the sensors and measurement boards of this library.
Main components
2
MMC5603NJ
WLP-4(0.8x0.8)-40℃~+85℃ 1.62V~3.6V 20bit 750uA、1.3mA、2.4mA、3.4mA I2C ±3mT ±3mT WLP-4(0.8x0.8) 3D Magnetic Sensors ROHSMEMSIC3D Magnetic Sensors
AFC10-S04QCA-00
SMD,P=1mm,卧贴-25℃~+85℃ 1 1mm 1x4P 3.14mm 4 4P 500mA 50V 6.3mm LCP Phosphor bronze SH Surface Mount, Right Angle Tin UL94V-0 SMD,P=1mm,卧贴 Wire To Board Connector ROHSJUSHUOWire To Board Connector
README
readme.mdTinkeringBase MMC5603NJ Magnetometer breakout
Sensor breakout using MEMSIC's MMC5603NJ Anisotropic Magneto-Resistive (AMR) magnetometer, supports Sparkfun Qwiic system.
It provides high accuracy of magnetic field data in 3D.
Specification
±30 G FSR, 20bits operation mode, 0.0625mG per LSB resolution, 2mG total RMS noise, heading accuracy of 1 deg.
Supply Voltage (VDD): 1.62~3.6V
Logic Low (VIL): 0.3*VDD max
Logic High (VIH): 0.7*VDD min
Current consumption: 4mA max
for more information, see datasheet
I2C address
0x30 only. not changable.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | AFC10-S04QCA-00 | MMC5603-Module:CONN-SMD_AFC10-S04QCA-00 | CN1, CN2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | MMC5603NJ | Package_BGA:WLP-4_0.86x0.86mm_P0.4mm | U1 |
Questions
How big is the MMC5603-Module PCB?
It measures 12.4 × 21.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MMC5603-Module use?
10 parts, built around the MMC5603NJ and AFC10-S04QCA-00. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MMC5603-Module KiCad files?
From the HackableElectronics/MMC5603-Module repository on GitHub, at the commit this page was made from: the board is MMC5603-Module.kicad_pcb and its schematic MMC5603-Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MMC5603-Module design in my own project?
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers16.5 × 20.3 mm
BMI270-Breakout
HackableElectronics/BMI270-Breakout
BMI270 IMU breakout board using STEMMA QT / Qwiic
16 parts1LGPL-2.1 - 2 layers16.5 × 20.3 mm
Lsm6dr3trc breakout
HackableElectronics/LSM6DS3TR-C-Breakout
LSM6DS3TR-C IMU breakout board using Qwiic
16 parts1GPL-3.0 - 4 layers17.8 × 43.2 mm
- 2 layers68.6 × 53.3 mm
- 2 layers100 × 7 mm
TLV493D rod
HackableElectronics/TLV493D-rod
100mm rod measures strong magnetic field in 3D.
9 partsCC0-1.0 - 2 layers49.6 × 37.2 mm
- 4 layers78 × 67.5 mm
Unified pcb
starduststorm/motionhexa
PCB designs and code for a motion-reactive, battery-powered hexagonal glowy object.
387 parts14