

Stm32 development board
Custom microcontroller development board design using KiCad. Includes schematic capture, component selection, and PCB layout layout with physical routing.
- Size
- 67 × 48.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 54
- Pads
- 229
- Tracks, vias
- 752, 84
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 May 2026
- Updated
- 28 Aug 2026
Overview
Stm32 development board is an open-source printed circuit board by hacer5417-cpu, from the hacer5417-cpu/Development-Board-Design-KiCad repository on GitHub. It is a 2-layer board of 67 × 48.5 mm with 50 parts on 54 nets, routed with 752 tracks and 84 vias.
Its parts include 14 capacitors, 14 resistors, 5 connectors, 3 diodes and 2 ICs. It belongs with the microcontroller boards boards and the STM32 boards of this library.
README
README.mdSTM32 Development Board Design
An open-source, custom STM32 microcontroller development board designed from scratch using KiCad. This project covers the entire hardware development lifecycle, including schematic capture, component selection, power management design, two-layer PCB layout routing, and 3D visualization.
Hardware Gallery & Visuals
1. Schematic Design & Architecture
Clean and structured schematic diagram featuring the STM32 microcontroller pinouts, crystal oscillators, decoupling capacitors, peripheral interfaces, and voltage regulation circuit.
2. 3D Model View (Top Side)
3D rendering of the populated top side, showcasing component alignments, RGB status LED, push buttons, micro-USB interface, and peripheral headers.
3. 3D Model View (Bottom Side)
3D rendering of the bottom side, featuring the power management component placement, ground planes, and custom silkscreen branding.
Technical Specifications & Features
- EDA Tool: KiCad (Schematic Capture & PCB Layout)
- Microcontroller: STM32 Series (LQFP-48 Package)
- Power Management: On-board low-dropout (LDO) voltage regulator circuit with proper filtering capacitors for stable operation.
- Signal Integrity: Designed with short return paths, clear ground plane separation, and optimized routing for high-frequency (HSE) and low-frequency (LSE) crystal oscillators.
- UI & Peripherals: Integrated Reset/User buttons, an RGB LED indicator, boot mode configuration jumpers, and easily accessible breakout headers for all GPIOs.
- Aesthetics: Custom silkscreen layer layout featuring personalized branding.
Future Enhancements
- Automated hardware validation and basic firmware testing (Blinky, UART communication).
- Designing an external enclosure model using CAD tools.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nf | Capacitor_SMD:C_0603_1608Metric | C1, C6, C7, C8, C13, C14 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9, R13 |
| 3 | 510R | Resistor_SMD:R_0603_1608Metric | R10, R11, R12 |
| 2 | 10uf | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C2, C3 |
| 2 | 1uf | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C4, C5 |
| 2 | 20R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 20pf | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 6,8PF | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10K | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV1 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 32,768KHZ | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y2 |
| 1 | 8MHZ | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | BOOTX | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | D_Schottky | Diode_SMD:D_TUMD2 | D2 |
| 1 | I/O HEADER1 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J4 |
| 1 | I/O HEADER2 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J5 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | LED_RGB | LED_SMD:LED_RGB_5050-6 | D4 |
| 1 | M1 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1 |
| 1 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H2 |
| 1 | M3 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H3 |
| 1 | M4 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H4 |
| 1 | RESET_BUTTON | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SWD_CONNECTOR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | TP3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | USER_BUTTON | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW3 |
The 48 most common of 50 parts.
Similar boards
- 2 layers187.2 × 26.6 mm

- 2 layers45.7 × 25.9 mm

- 2 layers21 × 31.5 mm

- 2 layers42 × 32.5 mm

Lipoboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
50 parts915 - 2 layers80 × 109.5 mm

NucDeck Right Controller PCB - Rev 1.2
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
50 parts561CERN-OHL-S-2.0 - 2 layers101 × 31.5 mm

- 2 layers123.9 × 94.4 mm

- 2 layers50 × 25 mm

Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223
Questions
How big is the Stm32 development board PCB?
It measures 67 × 48.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm32 development board use?
50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32 development board KiCad files?
From the hacer5417-cpu/Development-Board-Design-KiCad repository on GitHub, at the commit this page was made from: the board is stm32 development board.kicad_pcb and its schematic stm32 development board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32 development board design in my own project?
Its repository states no licence, so its author keeps all rights: ask hacer5417-cpu before reusing the design.