Skip to the content
2 layers104 × 127.4 mmShorky21, the printed circuit board in 3D

Shorky - 21 key game pad with 2 rotary encoders

Size
104 × 127.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
57
Nets
46
Pads
236
Tracks, vias
342, 30
Pours
187
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 May 2025
Updated
24 Jun 2025

Overview

Shorky21 is an open-source printed circuit board by gzowski, from the gzowski/shorky21 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 104 × 127.4 mm with 57 parts on 46 nets, routed with 342 tracks and 30 vias.

It is built around the 1N4148W and PCM12SMTR. Its parts include 23 diodes, 1 IC, 1 connector and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Shorky21 - Rev 1

21 key macro pad with twin rotary encoders Shorky21-rev1

PCB available for purchase via my Etsy page: "when i add it"

Thanks again to PCBWay who made yet another of my projects a possibility, I will soon be providing further images relating to the build but for now this will have to do. PCBWay provided all 3 plates which make up the macropad.

Features

Parts

PartQuantityDescription
Diodes23SMD 1N4148W
Microcontroller1NiceNano
Switches21MX switches, 5 pin
EC112Rotary Encoders
Keycaps191u keycaps
Keycaps22u keycaps
Stabalisers22u screw mounted stabalisers
LED Diodes4SK6812 MINI-E
M2 Standoff4M2x10mm
M2 Screws8M2x6mm
PTS5261Reset button
2P JST PH plug1socket for battery
1200mAh battery1battery with 2P JST connector
PCM12SMTR1Power switch (Optional)

Build Guide

  1. Solder the micro controller to the top of the PCB facing down (components underneath).
  2. Solder the diodes to the back of the board, noting the orientation of each diode ->|-
  3. Solder on the 2P JST socket on the pack, recommend snipping pins shorter so they do not stick through the top of the PCB so far.
  4. Solder the reset switch onto the back
  5. Solder the PCM12SMTR power switch on (if applicable), you can join the traces for switch bypass if not using a power switch.
  6. Solder in each of the LED's if using LED's
  7. Turn the PCB over, insert both of the screw mounted stabalisers and screw in from the underside
  8. Insert each of the MX switches into the top PCB plate, ensure correct orientation.
  9. Place the switch top plate and switches onto the middle PCB, turn the PCB back over and solder each of the switches in, ensure each switch is pushed down flush with the PCB.
  10. Turn back over and now insert both of the EC11 rotary encoders, this is a tight squeeze but does fit.
  11. Turn back over again and solder each of the encoders in place.
  12. Connect up the battery if applicable to the 2P socket (Double sided tape helps hold in place)
  13. Sandwich all PCB's held together with the M2 standoffs and screws.

Parts

57
QtyValueFootprintReferences
231N4148WDiode_SMD:D_SOD-123FSD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9, SD9 +7
15KEYSWButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB_LABELD2-D7, D2-D15, D2-D18, D3-D7, D3-D14, D3-D18, D3-D21, D4-D14, D4-D21, D5-D7, D5-D14, D5-D15, D5-D18, D5-D21, D6-D7
6, , , , ,
4KEYSWButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB_LED_lines_LED_labelD3-D15, D4-D7, D4-D15, D4-D18
2RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MX_label2Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_MX_label2D2-D14, D2-D21
2SW_Cherry_MX_2.00u_PCB_none_labelButton_Switch_Keyboard:SW_Cherry_MX_2.00u_PCB_none_labelD6-D14, D6-D15
1Conn_01x02_SocketClaudeFoot:PH_S2B-PH2-K_1x02_P2.00mm_HorizontalJ2
1LOGOLOGOG***
1PCM12SMTRClaudeFoot:MSK-12C02 Toggle SwitchSW43
1PTS526Symbol:PTS526RESET
1Universal_Pro_MicroClaudeFoot:Pro_Micro_Footprint_CornePMEU1

Similar boards

  • 2 layers97.6 × 78.2 mmTired Seagull, the printed circuit board in 3D

    Tired Seagull

    klouderone/SeagullMacropad

    The Seagull Macropad is based off the Rhino Pad, that supports both MX and Choc switches. The Macropad features an aesthetic but functional diode layout, an encoder, and pads for a battery and battery switch for…

    38 parts31
  • 2 layers116.3 × 59.2 mmRhino Pad Board V2, the printed circuit board in 3D

    Rhino Pad Board V2

    klouderone/therhinopad

    The Rhino Pad is a compact Macro Pad tailored for Computer-Aided Drawing, with 13 keys and an encoder that can be programmed for any macro in your program.

    31 parts22
  • 2 layers113.4 × 108.3 mmFlan46-left, the printed circuit board in 3D

    Flan46-left

    eduarbo/flan

    Flan — a slim, modular wireless split keyboard family. Flan 36 is the first: 36 Piantor-derived keys. Open hardware prototype.

    57 parts1GPL-3.0
  • 2 layers282 × 94 mmLegshark65 rev1, the printed circuit board in 3D

    Legshark65 rev1

    jemmec/legshark

    An open source 60% (15 by 5) ortholinear keyboard designed with both flexability and familiarity in mind.

    163 parts3MIT
  • 2 layers391 × 131.2 mmAustin, the printed circuit board in 3D

    Austin

    kitspace-test-repos/kicad6-file-collection

    558 partsMIT
  • 2 layers277.2 × 107.5 mmCorne V4 Pro Micro Edition, the printed circuit board in 3D

    Corne V4 Pro Micro Edition

    klouderone/CorneV4ProMicroEdition

    The Corne V4 with Pro Micro Micocontrollers, made specifically for beginners and support for wireless microcontrollers

    112 parts208CC-BY-4.0
  • 2 layers275.5 × 105.6 mmULK, the printed circuit board in 3D

    ULK

    Goga64/ULK

    Low profile split keyboard with Corne 42 Layout and Cerry ULP switches. (6mm height)

    124 parts58MIT
  • 2 layers334.7 × 118.8 mmSplit, the printed circuit board in 3D

    Split

    tedraykov/spliteo

    Ergonomic split keyboard with a 3x6 matrix layout and a 4 key thumb cluster.

    102 parts31

Questions

How big is the Shorky21 PCB?

It measures 104 × 127.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Shorky21 use?

57 parts, built around the 1N4148W and PCM12SMTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shorky21 KiCad files?

From the gzowski/shorky21 repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shorky21 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).