
Power supply
GustavoFA/MyPcbProjects
This repository contains all my personal electronic and PCB design projects.

This repository contains all my personal electronic and PCB design projects.
Led torch is an open-source printed circuit board by GustavoFA, from the GustavoFA/MyPcbProjects repository on GitHub. It is a 2-layer board of 65.1 × 25 mm with 5 parts on 4 nets, routed with 12 tracks and 0 vias.
Its parts include 1 resistor, 1 diode and 1 switch.
This repository contains all my personal electronic and PCB design projects.
For my projects I use KiCad EDA (v8+), since it's free and open source.
| Project | Description | Status | MCU/Core |
|---|---|---|---|
| LED Torch | Simple LED light with a cell battery | Done | None |
| Power Supply | Power supply with three DC voltage levels : 12V, 5V and 3.3V | Done | None |
The general workflow I follow for board development:
git clone https://github.com/yourusername/MyPcbProjects.git.kicad_pro file from the hardware/ folder| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Bat 2032 | Battery:BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-100x | SW1 |
The 4 most common of 5 parts.

GustavoFA/MyPcbProjects
This repository contains all my personal electronic and PCB design projects.


joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 65.1 × 25 mm and has 2 copper layers, 1.6 mm thick.
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GustavoFA/MyPcbProjects repository on GitHub, at the commit this page was made from: the board is Projects/LED Torch/led_torch.kicad_pcb and its schematic Projects/LED Torch/led_torch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GustavoFA before reusing the design.