
Led torch
GustavoFA/MyPcbProjects
This repository contains all my personal electronic and PCB design projects.

This repository contains all my personal electronic and PCB design projects.
Power supply is an open-source printed circuit board by GustavoFA, from the GustavoFA/MyPcbProjects repository on GitHub. It is a 2-layer board of 41 × 50 mm with 17 parts on 9 nets, routed with 56 tracks and 4 vias.
Its parts include 7 connectors, 3 capacitors, 3 resistors, 2 ICs and 1 diode. It belongs with the power boards of this library.
This repository contains all my personal electronic and PCB design projects.
For my projects I use KiCad EDA (v8+), since it's free and open source.
| Project | Description | Status | MCU/Core |
|---|---|---|---|
| LED Torch | Simple LED light with a cell battery | Done | None |
| Power Supply | Power supply with three DC voltage levels : 12V, 5V and 3.3V | Done | None |
The general workflow I follow for board development:
git clone https://github.com/yourusername/MyPcbProjects.git.kicad_pro file from the hardware/ folder| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J5, J7 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 10u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 1 | 560R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J6 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | LM317_TO-220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | SW_Wuerth_450301014042 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |

GustavoFA/MyPcbProjects
This repository contains all my personal electronic and PCB design projects.



hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…


It measures 41 × 50 mm and has 2 copper layers, 1.6 mm thick.
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GustavoFA/MyPcbProjects repository on GitHub, at the commit this page was made from: the board is Projects/Power Supply/power_supply.kicad_pcb and its schematic Projects/LED Torch/led_torch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GustavoFA before reusing the design.