

Usb3-hub
My very own USB3 Hub with these features:
- Size
- 70 × 140 mm
- Copper layers
- 6
- Thickness
- 1.55 mm
- Parts
- 229
- Nets
- 206
- Pads
- 816
- Tracks, vias
- 1,815, 290
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Sep 2024
- Updated
- 24 Mar 2025
Overview
Usb3-hub is an open-source printed circuit board by gumulka, from the gumulka/usb3-hub repository on GitHub. It is a 6-layer board of 70 × 140 mm with 229 parts on 206 nets, routed with 1,815 tracks and 290 vias.
It is built around the RP2040, AP62250Z6 and W25Q16JVSSIQ, with the AP22804AW5, TLV1117-33DCY and USB5807/KD among its other parts. Its parts include 87 resistors, 78 capacitors, 19 diodes, 15 ICs and 12 connectors. It belongs with the RP2040 boards of this library.
Main components
6RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)AP62250Z6
SOT-563-40℃~+85℃ 1 1.3MHz 155uA 2.5A 4.2V~18V 800mV~7V Adjustable Buck Buck Built-in Yes SOT-563 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersW25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAP22804AW5
SOT-25-40℃~+85℃ 1 2.5A 2.7V~5.5V 50mΩ Active High、Active Low High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-25 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution SwitchesTLV1117-33DCY
UncategorisedTexas InstrumentsUSB5807/KD
VQFN-100-EP(12x12)VQFN-100-EP(12x12) USB HUB Controllers ROHSMicrochip TechnologyUSB ICs
README
README.mdUSB3 Hub
My very own USB3 Hub with these features:
- Power to all ports controllable via USB
- Power to all ports controllable via switch
- Current measurement on half the ports
- Current readout either via display or USB
WIP
This is very much work in progress. I have not yet finished routing and there is no software whatsoever for the PCB, but I'm working on it.
Schematics
Can be found on the here
Parts
229| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 100nF | Capacitor_SMD:C_0402_1005Metric | C101, C102, C103, C201, C202, C203, C204, C205, C206, C207, C208, C209, C210, C1003, C1004, C1005 +36 |
| 21 | 0 | Resistor_SMD:R_0603_1608Metric | R502, R504, R506, R510, R602, R604, R606, R610, R702, R704, R706, R710, R803, R1003, R1007, R1008 +5 |
| 19 | LED | LED_SMD:LED_0603_1608Metric | D301, D501, D502, D503, D601, D602, D603, D701, D702, D703, D801, D802, D803, D1001, D1002, D1003 +3 |
| 13 | 330 | Resistor_SMD:R_0603_1608Metric | R103, R505, R511, R605, R611, R705, R711, R802, R805, R902, R905, R1002, R1005 |
| 12 | 47uF | Capacitor_SMD:C_1210_3225Metric | C501, C502, C601, C602, C701, C702, C801, C802, C901, C902, C1001, C1002 |
| 11 | 100k | Resistor_SMD:R_0603_1608Metric | R101, R102, R201, R202, R301, R512, R612, R712, R806, R906, R1006 |
| 9 | 0R | Resistor_SMD:R_0603_1608Metric | R203, R204, R213, R507, R607, R707, R804, R904, R1004 |
| 9 | 1k | Resistor_SMD:R_0603_1608Metric | R304, R306, R307, R503, R603, R703, R801, R901, R1001 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R207, R208, R209, R211, R212, R215, R401, R403 |
| 7 | AP22804AW5 | Package_TO_SOT_SMD:SOT-23-5 | U303, U502, U602, U702, U801, U901, U1001 |
| 7 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW301, SW501, SW601, SW701, SW801, SW901, SW1001 |
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric | C401, C402, C403, C404, C406, C407 |
| 6 | USB3_A | g-Connector_USB:AMPHENOL_GSB312137CHR | J501, J601, J701, J801, J901, J1001 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP201, TP202, TP204, TP205 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R509, R609, R709 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R508, R608, R708 |
| 3 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C301, C310, C313 |
| 3 | 200k | Resistor_SMD:R_0603_1608Metric | R205, R206, R210 |
| 3 | 65m | Resistor_SMD:R_1206_3216Metric | R501, R601, R701 |
| 3 | INA381A1 | g-Package_DFN:8-WSON_2x2mm | U501, U601, U701 |
| 3 | Standof | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopOnly | H101, H102, H103 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C221, C222 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C315, C316 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R302, R303 |
| 1 | 12Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y301 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R214 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C212 |
| 1 | 1uH 2.5A | Inductor_SMD:L_Bourns-SRN4018 | L401 |
| 1 | 25Mhz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y201 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q303 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R402 |
| 1 | AP62250Z6 | Package_TO_SOT_SMD:SOT-563 | U402 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J103 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J302 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J303 |
| 1 | DISPLAY | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J101 |
| 1 | Debug | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J301 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U302 |
| 1 | TLV1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U401 |
| 1 | USB3_B_Micro | g-Connector_USB:AMPHENOL_GSB443133HR | J102 |
| 1 | USB5807 | g-Package_DFN:100-VQFN | U201 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U301 |
Similar boards
- 4 layers41 × 41 mm

- 4 layers60 × 60 mm

Usb switch
alvarop/debugotron
Debugotron is a collection of debugging/automation tools I've wanted in the past but didn't have access to. Currently, the tools include:
77 parts52BSD-3-Clause - 2 layers101.6 × 53.3 mm

ArduinoMega Ethernet
dmanla/SecureConnectivityDevelopmentPlatform
A development platform which provides secure connectivity and data logging support while maintaining compatibility with Arduino-Mega hardware and software.
116 parts - 2 layers100 × 86 mm

InterfaceBoard
farlepet/keithley-615-printer-boards
Drop-in replacements for the buffer/printer boards for the Keithley 615 Electrometer
184 partsMIT - 2 layers52.9 × 35.9 mm

ADC Silence Detector
markusbichl/ADC_Silence_Detector
WCH CH32X033 based Silence detector for turntable to Toslink converter
17 parts - 6 layers76.2 × 76.2 mm

- 4 layers31.6 × 27.7 mm

Moon child
Matthew-Bon/moon_child
A rocket flight computer to support CBJAMO's amoral interests.
172 partsGPL-3.0 - 6 layers120.9 × 90 mm

SvayamV3 IIK
si-nalsal/pcb-mantis
A servo-based UAV flight controller built around the STM32H743IIK6 (Cortex-M7, UFBGA-201, 0.65 mm pitch). The board distributes power to a fixed-wing/multirotor airframe with 16 PWM servo outputs, redundant IMU and…
290 partsCERN-OHL-S-2.0
Questions
How big is the Usb3-hub PCB?
It measures 70 × 140 mm and has 6 copper layers, 1.55 mm thick.
What parts does the Usb3-hub use?
229 parts, built around the RP2040, AP62250Z6, W25Q16JVSSIQ and AP22804AW5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb3-hub KiCad files?
From the gumulka/usb3-hub repository on GitHub, at the commit this page was made from: the board is kicad/usb3-hub.kicad_pcb and its schematic kicad/hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb3-hub design in my own project?
Its repository states no licence, so its author keeps all rights: ask gumulka before reusing the design.