
Capybara rocket
adam-kabbara/RSX-CANSAT-2026
This is a repository design to manage the files made by the Aerial team under the Robotics for Space eXploration design team at the University of Toronto

PBLE Circuit is an open-source printed circuit board by guilhermefernandesk, from the guilhermefernandesk/Projeto-Placa-PBLE02 repository on GitHub. It is a 2-layer board of 80 × 80 mm with 80 parts on 99 nets, routed with 627 tracks and 64 vias.
It is built around the LM324DG4, AB38T-32.768KHZ and ATS12A, with the ATS20A and PJ-002A among its other parts. Its parts include 15 capacitors, 5 resistors and 5 connectors. It belongs with the PIC boards of this library.
O projeto consiste na montagem de uma placa realizada por alunos da unifei. Bem como suas correções necessárias e simulação de uma aplicação via software na linguagem C.
https://drive.google.com/file/d/1amIkBEUgF5RGjeDBrGX1CGrTWx1kXM-I/view?usp=sharing
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10u | Capacitor_Tantalum_SMD:CP_EIA-2012-15_AVX-P_Pad1.30x1.05mm_HandSolder | C2, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 13 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_B1, R_B2, R_B3, R_B4, R_B5, R_L1, R_L2, R_L3, R_L4, R_L5, R_RST1, RI2C'1, RI2C1 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_RTC_MFP5, R2, R5, R6, R7, R8 |
| 6 | 1825910-6 | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW_RESET1, SW1, SW2, SW3, SW4, SW5 |
| 6 | LED | Biblioteca PCB:LTST-C150GKT | D_L1, D_L2, D_L3, D_L4, D_L5, DA1 |
| 4 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C_RTC_X1, C_RTC_X2, C_USB_O1, C_USB_O2'1 |
| 4 | 2k4 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11, R12 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J2, J5, J6 |
| 2 | 15pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C_X1, C_X2 |
| 2 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_PWM1, R_PWM2 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 20p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C_PWM1 |
| 1 | 3296W-1-103RLF | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | VR2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_DA1 |
| 1 | 39p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C_PWM2 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | AB38T-32.768KHZ | Biblioteca PCB:AB38T | X_RTC5 |
| 1 | ATS12A | Biblioteca PCB:ATS12A | X_USB1 |
| 1 | ATS20A | Biblioteca PCB:ATS20A | X_PIC1 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J_ICSP1 |
| 1 | Conn_01x12_Male | Connector_PinHeader_1.00mm:PinHeader_1x12_P1.00mm_Vertical | J_EXP6 |
| 1 | LCD2X16 | Biblioteca PCB:JHD162A | U_LCD1 |
| 1 | LD1117S50TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U_A1 |
| 1 | LM324DG | Biblioteca PCB:LM324DG | U_AMP5 |
| 1 | MCP2200-I-SO | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U_USB_SERIAL_CONVERSOR1 |
| 1 | MCP7940N-xSN | Biblioteca PCB:MCP7940N | U_RTC5 |
| 1 | PIC18F4550-IPT | Package_QFP:TQFP-44_10x10mm_P0.8mm | U_PIC18F4450 |
| 1 | PJ-002A | Biblioteca PCB:CUI_PJ-002A | J1 |
| 1 | R_POT | Biblioteca PCB:P160KN-0QC15B100K | RV1 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J3 |

adam-kabbara/RSX-CANSAT-2026
This is a repository design to manage the files made by the Aerial team under the Robotics for Space eXploration design team at the University of Toronto




Maverick-Shark/X65_BigMiST
The X65 is an ultimate computer for everyone interested in the venerable 65-series of 8-bit and 16-bit CPUs, i.e. the 6502 and 65816.

grantek/minisynth32
A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.

thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules

jrowe88/RPi-LED-RGBMatrix-Hat
Hardware hat for Raspberry Pi to support RGB Matrix and LED strips
It measures 80 × 80 mm and has 2 copper layers, 1.6 mm thick.
80 parts, built around the LM324DG4, AB38T-32.768KHZ, ATS12A and ATS20A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the guilhermefernandesk/Projeto-Placa-PBLE02 repository on GitHub, at the commit this page was made from: the board is Hardware/PBLE Circuit.kicad_pcb and its schematic Hardware/Alimentação.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask guilhermefernandesk before reusing the design.