2 layers65 × 47 mm
Midi dmx bridge
chrisneukam/arduino-MidiDmxBridge
MIDI to DMX protocol translator for lighting systems based on Arduino
33 parts2Apache-2.0
2 layers65 × 56.5 mm
InterfaceS88GleisboxRPi
guidodehek/InterfaceS88GleisboxRPi2Interface pcb for controlling Märklin model railway using the Gleisbox (60116) and S88 via Rocrail.
- Size
- 65 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 88
- Pads
- 202
- Tracks, vias
- 374, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Jan 2023
- Updated
- 19 Dec 2024
Overview
InterfaceS88GleisboxRPi is an open-source printed circuit board by guidodehek, from the guidodehek/InterfaceS88GleisboxRPi repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 56.5 mm with 49 parts on 88 nets, routed with 374 tracks and 16 vias.
It is built around the ISO1050DUB, NME0505SC and KMDGX-10S-BS, with the PJ-102AH and RJ45 among its other parts. Its parts include 17 resistors, 11 capacitors, 8 ICs, 4 connectors and 2 diodes.
Main components
5
ISO1050DUB
SOP-8-2.54mm-55℃~+105℃ 1 1Mbps 2500 3V~5.5V 4.75V~5.25V 50kV/us Bus fault detection and protection、Fail-safe SOP-8-2.54mm Isolated CAN Transceivers ROHSTexas InstrumentsIsolated CAN Transceivers
NME0505SC
SIP,11.7x6mmIsolated Power ModulesYLPTECKMDGX-10S-BS
插件Circular Connectors & Cable ConnectorsKycon
PJ-102AH
插件-25℃~+85℃ 24V 2mm 5A 6.5mm DC Power Jack Right Angle Plugin DC Power Connectors ROHSCUIDC Power Connectors
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdInterfaceS88GleisboxRPi
Interface pcb for controlling Märklin model railway using the Gleisbox (60116) and S88 via Rocrail.
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C7, C8, C9, C10 |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | , , H1, H2 | |
| 4 | 6N137 | Package_DIP:DIP-8_W7.62mm | U5, U6, U7, U8 |
| 3 | 1k5 | Resistor_SMD:R_0805_2012Metric | R8, R12, R14 |
| 3 | 270 | Resistor_SMD:R_0805_2012Metric | R7, R11, R13 |
| 3 | 4k7 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 16Mhz | Crystal:Crystal_HC50_Vertical | Y1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 390 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 680 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | ISO1050DUB | Package_SO:SOP-8_6.62x9.15mm_P2.54mm | U2 |
| 1 | KMDGX-10S-BS | CustomLib:KMDGX10SBS | J2 |
| 1 | LM317_SOT-223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP2515-xSO | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | NME0505SC | CustomLib:Murata-NME0505SC-0-0-0 | U3 |
| 1 | PJ-102AH | Connector_BarrelJack:BarrelJack_CUI_PJ-102AH_Horizontal | J7 |
| 1 | RJ45 | CustomLib:215877-1 | J4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers100 × 50 mm
- 4 layers128 × 79 mm
- 2 layers65 × 56 mm
CANHat2
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
28 parts24 - 2 layers97 × 72.8 mm
- 4 layers113.5 × 105.5 mm
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
243 parts208 - 4 layers127 × 165 mm
ECU
lflaherty/ev-ecu
Custom ECU (firmware and hardware) for Bespoke Electric Vehicles
258 parts13Apache-2.0 - 4 layers260 × 113 mm
Questions
How big is the InterfaceS88GleisboxRPi PCB?
It measures 65 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the InterfaceS88GleisboxRPi use?
49 parts, built around the ISO1050DUB, NME0505SC, KMDGX-10S-BS and PJ-102AH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InterfaceS88GleisboxRPi KiCad files?
From the guidodehek/InterfaceS88GleisboxRPi repository on GitHub, at the commit this page was made from: the board is pcb/InterfaceS88GleisboxRPi/InterfaceS88GleisboxRPi.kicad_pcb and its schematic pcb/InterfaceS88GleisboxRPi/InterfaceS88GleisboxRPi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the InterfaceS88GleisboxRPi design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).