

Ble audio adapter
The three deliverable files are the following:
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 41
- Pads
- 94
- Tracks, vias
- 108, 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Oct 2016
- Updated
- 21 Nov 2016
Overview
Ble audio adapter is an open-source printed circuit board by gsmadi, from the gsmadi/ble-audio-adapter repository on GitHub. It is a 2-layer board with 24 parts on 41 nets, routed with 108 tracks and 4 vias.
It is built around the LM386, LD1117S33TR(MS) and LD1117S50TR(MS), with the MCP41010-E/P among its other parts. Its parts include 6 capacitors, 6 connectors and 5 resistors. It belongs with the audio and music and radio and wireless boards of this library.
Main components
4LM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmpsLD1117S33TR(MS)
SOT-223-20℃~+125℃@(Ta) 1 1.4V@(1A) 12V 1A 2mA 3.3V Fixed Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLD1117S50TR(MS)
SOT-223-20℃~+125℃@(Ta) 1 1.4V@(1A) 12V 1A 2mA 4.9V~5.1V Fixed Positive Thermal Shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMCP41010-E/P
PDIP-8-40℃~+125℃ 1 10kΩ 1LSB 1MHz 1uA 2.7V~5.5V 256 52Ω、73Ω 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function ±20% PDIP-8 Digital Potentiometers ROHSMicrochip TechnologyDigital Potentiometers
README
README.mdble-audio-adapter
The three deliverable files are the following:
- Schematic: ble-audio-adapter.sch
- PCB: ble-audio-adapter.kicad_pcb
- CAD: ble-audio.stl
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3 |
| 2 | 100uF | Capacitors_SMD:C_1206_HandSoldering | C3, C5 |
| 2 | 1K | Resistors_SMD:R_0603_HandSoldering | R4, R5 |
| 2 | 1mF | Capacitors_SMD:C_1206_HandSoldering | C4, C6 |
| 1 | 0.05uF | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 220uF | Capacitors_Tantalum_SMD:TantalC_SizeC_EIA-6032_HandSoldering | C1 |
| 1 | 9V | component_footprints:Battery_Connector | BT1 |
| 1 | AUDIO_JACK_CONN | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
| 1 | BLE_UART_friend | Socket_Strips:Socket_Strip_Straight_1x08 | BLE1 |
| 1 | KL05 | component_footprints:DIP-26_W15.24mm | MCU1 |
| 1 | LD1117S33TR | SOT-223 | REG1 |
| 1 | LD1117S50TR | SOT-223 | REG2 |
| 1 | LM386 | SMD_Packages:SOIC-8-N | A1 |
| 1 | MCP41010 | SMD_Packages:SOIC-8-N | VR1 |
| 1 | PAIR_BTN_CONN | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | PLAY/PAUSE_BTN | Pin_Headers:Pin_Header_Straight_1x02 | P4 |
| 1 | PWR_SW_CONN | Pin_Headers:Pin_Header_Straight_1x02 | P2 |
| 1 | VOL_DOWN_BTN | Pin_Headers:Pin_Header_Straight_1x02 | P6 |
| 1 | VOL_UP_BTN | Pin_Headers:Pin_Header_Straight_1x02 | P5 |
Similar boards
- 2 layers100 × 100 mm

- 4 layers100 × 82 mm

EMBARCADOS CURSO PCB
andremdaraujo/EMBARCADOS-CURSO-PCB
Projeto desenvolvido durante o curso Projeto de PCB para Sistemas Embarcados
175 parts9 - 6 layers150.1 × 110.1 mm

- 4 layers62.3 × 94.3 mm

STM32N6 Thesis Board
tobiasbaas/Roboterarm1
Herzlich willkommen zum Repo des Robotersarmes der Arbeitsgruppe. Bitte beachtet, dass es sich hierbei handelt um eine Erweiterung bereits vorhandener Infrastruktur.
221 parts1 - 2 layers145 × 100 mm

- 2 layers91 × 77.5 mm

- 2 layers91 × 96.6 mm

- 2 layers90 × 102 mm

Questions
What parts does the Ble audio adapter use?
24 parts, built around the LM386, LD1117S33TR(MS), LD1117S50TR(MS) and MCP41010-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ble audio adapter KiCad files?
From the gsmadi/ble-audio-adapter repository on GitHub, at the commit this page was made from: the board is ble-audio-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ble audio adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask gsmadi before reusing the design.