2 layers56 × 65 mm
2 layers90 × 40 mm
Rysbattery
GroupOfRobots/MiniRysElectronics1PCB project and other
- Size
- 90 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 6
- Pads
- 23
- Tracks, vias
- 20, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Mar 2016
- Updated
- 18 Aug 2026
Overview
Rysbattery is an open-source printed circuit board by GroupOfRobots, from the GroupOfRobots/MiniRysElectronics repository on GitHub. It is a 2-layer board of 90 × 40 mm with 13 parts on 6 nets, routed with 20 tracks and 0 vias.
It is built around the SSM3J328R,LF. Its parts include 8 connectors, 1 resistor, 1 diode, 1 transistor and 1 fuse.
Main components
1README
README.mdMiniRysElectronics
This repo contains schematics and PCB layouts for all the custom boards used by the MiniRyś robot.
supervisor: Kamil Jabłoński
Boards:
- RysBoard
- RysBattery
- beacon (obsolete)
- dwm1000_addon (obsolete)
RysBoard
Main board for the MiniRyś robot - a Raspberry Pi 4B shield with motor drivers, power delivery circuitry, sensor connectors and more.
RysBattery
Custom 18650 battery holder supporting protected cells (longer!) and with reverse polarity protection.
Beacon
(obsolete)
A STM Nucleo adapter for the DWM1000 module with a power input jack.
DWM1000 addon
(obsolete)
A DWM1000 module breakout board that was to be compatible with both the RysBoard and the Beacon boards.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | J5, J6, J7, J8 |
| 2 | BATT_CLIP | rysbattery:keystone_54 | J1, J2 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 2.5A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | LED_RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | RYSBOARD+ | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm_Relief | J3 |
| 1 | RYSBOARD- | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm_Relief | J4 |
| 1 | SSM3J328R | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | bionik_logo_small | rysbattery:bionik_logo_small | LOGO1 |
Questions
How big is the Rysbattery PCB?
It measures 90 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rysbattery use?
13 parts, built around the SSM3J328R,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rysbattery KiCad files?
From the GroupOfRobots/MiniRysElectronics repository on GitHub, at the commit this page was made from: the board is rysbattery/rysbattery.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rysbattery design in my own project?
Its repository states no licence, so its author keeps all rights: ask GroupOfRobots before reusing the design.
More from GroupOfRobots/MiniRysElectronics
1Similar boards
- 2 layers60 × 60 mm
HighPower Mechaduino
pointhi/HighPower-Mechaduino
Mechaduino derivative which drives up to 10A, drawn using KiCad
140 parts31 - 4 layers161 × 100 mm
- 4 layers60 × 85 mm
VehicleVCU PCB
nsm81/VehicleVCU_PCB
A Vehicle Control Unit provides multiple CANBUS transceivers for communication within a vehicle.
86 parts1 - 4 layers160 × 100 mm
OSM env01
devtank-ltd/kicad_osm_env01
This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.
243 parts - 2 layers50 × 56 mm
- 4 layers91.8 × 66.4 mm
POWER BUTTON Board
MartinChauveliere/Xbox_Controller_PCB
Replication des PCB d'une manette Xbox modèle 1914
211 parts - 2 layers40 × 20 mm
- 2 layers74.9 × 49.5 mm
