
Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

DIY TickiT PCB with WS2812B LEDs
TickiT WS2812B is an open-source printed circuit board by GrigoreProca, from the GrigoreProca/TickiT-Mood-Light-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 55 × 15.5 mm with 53 parts on 34 nets, routed with 180 tracks and 16 vias.
It is built around the ATTINY402-SSN, DW01A and TP4056-42-ESOP8, with the WS2812B and FS8205A among its other parts. Its parts include 18 capacitors, 14 diodes, 7 resistors, 4 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
DIY TickiT PCB with WS2812B LEDs
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C5, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 12 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4 |
| 3 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C6 |
| 1 | +5V | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | ATtiny402-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Battery | SamacSys_Parts:S2BPHSM4TBLFSN | J1 |
| 1 | Blue | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D13 |
| 1 | D | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | FS8205A | SamacSys_Parts:SOP65P640X120-8N | Q1 |
| 1 | G | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Power | SamacSys_Parts:S2BPHSM4TBLFSN | J2 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | Red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D14 |
| 1 | Switch | SamacSys_Parts:S2BPHSM4TBLFSN | J3 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U4 |
| 1 | TSOP382xx | OptoDevice:Vishay_MINICAST-3Pin | U2 |

iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER
A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.

milovanpms/talk-e
📻 — A simple LoRa-based talkie-walkie built on ESP32, operating on the 433 MHz frequency band for long-range, low-power wireless communication.

nikolaus018/dji-fcc-esp32
ESP32-S3 firmware that switches a DJI N1 remote to FCC mode over USB (replaces the Android app)

devKOff/pcb-lipo-power-management-system
An integrated PCB power management system for single-cell Li-Po batteries featuring onboard charging, circuit protection, and a DC-DC boost converter with selectable 5V and 12V DC outputs.



houseofthe051010/ESP32-Walkie-Talkie-V2
This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.
It measures 55 × 15.5 mm and has 2 copper layers, 1.6 mm thick.
53 parts, built around the ATTINY402-SSN, DW01A, TP4056-42-ESOP8 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GrigoreProca/TickiT-Mood-Light-PCB repository on GitHub, at the commit this page was made from: the board is TickiT_WS2812B_PCB/TickiT_WS2812B.kicad_pcb and its schematic TickiT_WS2812B_PCB/TickiT_WS2812B.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).