
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

Terminal device firmware for CERS
CERS is an open-source printed circuit board by greenlaver, from the greenlaver/CERS-terminal repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 90 mm with 18 parts on 41 nets, routed with 123 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE. Its parts include 3 connectors, 2 resistors, 2 switches, 1 IC and 1 diode. It belongs with the ESP32 boards of this library.
CERS-terminal is the terminal device developed for CERS(COVID-19 Entrance Recording System).

Schematic and board design files are contained in KiCad.
Works on ESP32, developed with Arduino IDE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CONF | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW2 |
| 1 | ESP32-DEVKITC | ESP32-DEVKITC:XCVR_ESP32-DEVKITC | U1 |
| 1 | GL8ED48 | LED_THT:LED_D3.0mm-3 | D1 |
| 1 | IN/OUT | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | NFC | FFC:23287026 | J1 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | PWR | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J2 |
The 10 most common of 18 parts.

harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.

cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.




ste2425/PSP-Bluetooth-AVConnector
An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)

It measures 60 × 90 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the greenlaver/CERS-terminal repository on GitHub, at the commit this page was made from: the board is KiCad/CERS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).