
Pots
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

36-key monosplit keyboard for choc_v1v2/MX switches
Keyatura is an open-source printed circuit board by greengrocer98, from the greengrocer98/keyatura repository on GitHub. It is a 2-layer board of 254.6 × 126.1 mm with 93 parts on 63 nets, routed with 627 tracks and 0 vias.
Its parts include 36 diodes, 36 switches, 3 resistors, 3 inductors and 1 IC. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
Keyatura (/ˌkeɪ.əˈtʊə.rə/) - 36-key ergonomic keyboard with MX-spacing and support of choc_v2v1/MX switches.



| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | D | keyatura:diode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 36 | SW_Push | key-switches:SW_MX_Kailh_Choc_V1V2_HotSwap_Hybrid | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +20 |
| 8 | MountingHole | keyatura:mounting hole | H0, H1, H2, H3, H4, H5, H6, H7 |
| 3 | LED | keyatura:LED | L0, L1, L2 |
| 3 | LOGO | LOGO | G***, G***, G1 |
| 3 | Resistor | keyatura:resistor | R0, R1, R2 |
| 1 | Battery | keyatura:battery | J1 |
| 1 | Reset Button | keyatura:reset button | RST_BTN1 |
| 1 | SW_SPDT | keyatura:MSK-12C02 | BAT_KEY1 |
| 1 | SuperMini nRF52840 | keyatura:supermini | U1 |

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

ChrisChrisLoLo/keezyboost40
4x10 ortholinear with an LCD in the middle. Uses the Raspberry Pi Pico, as well as Rust firmware


voltlog/Valve-Actuator
If you are looking for sources of previous revisions (revA, revB, revC) checkout the different branches of this repo.



Musab-Hassan/aurora_keyboard
A gorgeous split wireless ortholinear keyboard that you can build yourself.

profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
It measures 254.6 × 126.1 mm and has 2 copper layers, 1.6 mm thick.
93 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the greengrocer98/keyatura repository on GitHub, at the commit this page was made from: the board is kicad/keyatura/keyatura.kicad_pcb and its schematic kicad/keyatura/keyatura.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask greengrocer98 before reusing the design.