4 layers100 × 20 mm
4 layers100 × 20 mm
Passives
greatscottgadgets/misc21miscellaneous Great Scott Gadgets projects
- Size
- 100 × 20 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 59
- Nets
- 28
- Pads
- 464
- Tracks, vias
- 82, 38
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Feb 2014
- Updated
- 5 Nov 2026
Overview
Passives is an open-source printed circuit board by greatscottgadgets, from the greatscottgadgets/misc repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 100 × 20 mm with 59 parts on 28 nets, routed with 82 tracks and 38 vias.
Its parts include 22 connectors, 16 capacitors, 11 resistors and 10 inductors.
README
README.mdmisc
miscellaneous Great Scott Gadgets projects
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | Conn_Coaxial | sma-variants:Linx_SMA_CONSMA003.062 | J1, J2, J3, J4, J5, J10, J11, J12, J15, J16, J17, J18, J21, J22, J23, J24 +4 |
| 12 | C | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3, C4, C5, C8, C9, C10, C11, C13, C14, C15 |
| 8 | R | Resistor_SMD:R_0201_0603Metric | R4, R5, R6, R7, R8, R9, R10, R11 |
| 4 | C | Capacitor_SMD:C_0402_1005Metric | C6, C7, C12, C16 |
| 4 | L | Inductor_SMD:L_0603_1608Metric | L3, L7, L11, L12 |
| 3 | L | Inductor_SMD:L_0201_0603Metric | L1, L5, L8 |
| 3 | L | Inductor_SMD:L_0805_2012Metric | L2, L4, L6 |
| 3 | R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J25, J26 |
Questions
How big is the Passives PCB?
It measures 100 × 20 mm and has 4 copper layers, 1.59 mm thick.
What parts does the Passives use?
59 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Passives KiCad files?
From the greatscottgadgets/misc repository on GitHub, at the commit this page was made from: the board is evaluation-boards/passives/passives.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Passives design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from greatscottgadgets/misc
12- 2 layers55 × 25 mm
- 4 layers23 × 81 mm
- 4 layers164 × 25 mm
- 4 layers23 × 75 mm
- 4 layers100 × 25 mm
- 4 layers32.9 × 100 mm
- 4 layers100 × 25 mm
- 4 layers75 × 25 mm
- 4 layers80 × 130 mm
- 6 layers80 × 100 mm
- 6 layers80 × 80 mm
Similar boards
- 4 layers34 × 101 mm
NucDeck Left Top Controller BMS PCB - Rev 1.1
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 4 layers80 × 80 mm
- 4 layers23.7 × 34.2 mm
SmartWatch V5
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
59 parts258MIT - 4 layers97 × 80.9 mm
Module17-HMI
M17-Project/Module_17
M17 modem board for 9600-baud capable radios
59 parts129CERN-OHL-W-2.0 - 4 layers25 × 40 mm
- 4 layers283.2 × 131.5 mm
- 4 layers17.8 × 51.6 mm
- 4 layers37 × 27.5 mm
