

Geometric Electricity
A passive LC circuit experiment comparing 85-node Euclidean and hyperbolic disks.
- Size
- 150 × 130 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 1,217
- Nets
- 175
- Pads
- 2,090
- Tracks, vias
- 6,099, 621
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Oct 2026
- Updated
- 5 Oct 2026
Overview
Geometric Electricity is an open-source printed circuit board by Grant-E-G, from the Grant-E-G/Geometric_Electricity repository on GitHub, published under the MIT licence. It is a 2-layer board of 150 × 130 mm with 1,217 parts on 175 nets, routed with 6,099 tracks and 621 vias.
It is built around the E40, E15 and E11. Its parts include 699 capacitors, 170 inductors, 2 resistors and 2 connectors.
Main components
3E40
--10°C ~ 60°C 0.7V 1 15V 2.50" Length x 1.50" Width x 0.85" Height (63.5mm x 38.1mm x 21.6mm) 3 W 3.5 kV 4000V 5-DIP module 750µA High voltage isolation module ITE (Commercial) Proportional Output Through hole - Power Module/Power Supply ROHSXP PowerPower Supply Module,Power SuppliesE15
0-12VDC to 1.5kVDC, Iout (max) 2mA, 3W DC-DC ConverterXP PowerUncategorisedE11
-Brass Nickel - Audio ConnectorsSwitchcraftAudio Connectors (Headphones)
README
README.mdGeometric Electricity
A passive LC circuit experiment comparing 85-node Euclidean and hyperbolic disks.
The project outline describes the intended board. The design and measurement plan records calculations, equipment, decisions and remaining validation. Open the KiCad project for the current CAD draft; reproduction commands generate simulations and verify connectivity.
The hardware is a design draft. Generated manufacturing files remain previews until routing, procurement and assembly checks pass. Bench validation follows assembly.
Repository Layout
notes/: research plans, reading notes, project logs, and informal planning.math/: definitions, theorem targets, proof sketches, examples, and open questions.latex/: manuscript source, macros, bibliography, and TeX inputs.latex/render/: rendered PDFs and TeX build products. This directory is ignored by git.code/: one consolidated simulation, CAD-generation and measurement-analysis script.hardware/: one KiCad project, sparse adjacency/metric data, BOM.build/: ignored simulation reports, figures, native checks and manufacturing previews.sources/: source material used during research.sources/pdfs/: local PDF references. PDF files are ignored by git.
Working Sequence
- Read the design/measurement plan and the original outline.
- Reproduce simulations, probe loading, tolerance and defect sweeps.
- Generate the KiCad schematic and placement; route and run native checks.
- Confirm a landed total below $200, including PCB/stencil, shipping, tax, consumables and spares. Component precision must not break this constraint.
- Verify the stencil/assembly map, assemble with a measured reflow profile and calibrate the RF fixture and probes.
- Measure low-order responses and pulses, fit overlapping modes where justified, and state partial-spectrum limits explicitly.
All generated reports/previews stay in ignored build/. With the user-provided
PCBWay shipping-inclusive quote and $10 stencil, the proposed TDK parts give
$170.34 for lead-free HASL or $194.81 for ENIG. These totals retain $15 component
shipping, $20 tax/import and $20 contingency allowances. Component delivery and
any additional stencil shipping remain unconfirmed. The current Abracon BOM
costs $181.48 with HASL; its ENIG scenario exceeds $200. No purchasing or physical
measurements have occurred.
Coding Guidelines
- Prefer Rust for implementation work. Use Python as a backup, with type checking.
- Prefer functional code when possible. Relax this guideline when it causes performance issues.
- Long functions are fine.
- Avoid inheritance. Object-oriented design is generally discouraged.
- Avoid excessive code fragmentation. Longer files are acceptable when they keep related logic together.
- Lint code aggressively. Use Black for Python formatting.
- Shorter code is almost always better code.
Parts
1,217| Qty | Value | Footprint | References |
|---|---|---|---|
| 699 | 330p | Capacitor_SMD:C_0603_1608Metric | C1, C10, C11, C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112 +683 |
| 170 | 1u | Inductor_SMD:L_0805_2012Metric | L1, L10, L11, L100, L101, L102, L103, L104, L105, L106, L107, L108, L109, L110, L111, L112 +154 |
| 170 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP10, TP12, TP100, TP102, TP104, TP106, TP108, TP110, TP112, TP114, TP116, TP118, TP120, TP122, TP124, TP126 +154 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | SOURCE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | E00 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | E01 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | E02 | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | E03 | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | E04 | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | E05 | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | E06 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | E07 | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | E08 | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | E09 | TestPoint:TestPoint_Pad_D1.0mm | TP19 |
| 1 | E10 | TestPoint:TestPoint_Pad_D1.0mm | TP21 |
| 1 | E11 | TestPoint:TestPoint_Pad_D1.0mm | TP23 |
| 1 | E12 | TestPoint:TestPoint_Pad_D1.0mm | TP25 |
| 1 | E13 | TestPoint:TestPoint_Pad_D1.0mm | TP27 |
| 1 | E14 | TestPoint:TestPoint_Pad_D1.0mm | TP29 |
| 1 | E15 | TestPoint:TestPoint_Pad_D1.0mm | TP31 |
| 1 | E16 | TestPoint:TestPoint_Pad_D1.0mm | TP33 |
| 1 | E17 | TestPoint:TestPoint_Pad_D1.0mm | TP35 |
| 1 | E18 | TestPoint:TestPoint_Pad_D1.0mm | TP37 |
| 1 | E19 | TestPoint:TestPoint_Pad_D1.0mm | TP39 |
| 1 | E20 | TestPoint:TestPoint_Pad_D1.0mm | TP41 |
| 1 | E21 | TestPoint:TestPoint_Pad_D1.0mm | TP43 |
| 1 | E22 | TestPoint:TestPoint_Pad_D1.0mm | TP45 |
| 1 | E23 | TestPoint:TestPoint_Pad_D1.0mm | TP47 |
| 1 | E24 | TestPoint:TestPoint_Pad_D1.0mm | TP49 |
| 1 | E25 | TestPoint:TestPoint_Pad_D1.0mm | TP51 |
| 1 | E26 | TestPoint:TestPoint_Pad_D1.0mm | TP53 |
| 1 | E27 | TestPoint:TestPoint_Pad_D1.0mm | TP55 |
| 1 | E28 | TestPoint:TestPoint_Pad_D1.0mm | TP57 |
| 1 | E29 | TestPoint:TestPoint_Pad_D1.0mm | TP59 |
| 1 | E30 | TestPoint:TestPoint_Pad_D1.0mm | TP61 |
| 1 | E31 | TestPoint:TestPoint_Pad_D1.0mm | TP63 |
| 1 | E32 | TestPoint:TestPoint_Pad_D1.0mm | TP65 |
| 1 | E33 | TestPoint:TestPoint_Pad_D1.0mm | TP67 |
| 1 | E34 | TestPoint:TestPoint_Pad_D1.0mm | TP69 |
| 1 | E35 | TestPoint:TestPoint_Pad_D1.0mm | TP71 |
| 1 | E36 | TestPoint:TestPoint_Pad_D1.0mm | TP73 |
| 1 | E37 | TestPoint:TestPoint_Pad_D1.0mm | TP75 |
| 1 | E38 | TestPoint:TestPoint_Pad_D1.0mm | TP77 |
| 1 | E39 | TestPoint:TestPoint_Pad_D1.0mm | TP79 |
| 1 | E40 | TestPoint:TestPoint_Pad_D1.0mm | TP81 |
| 1 | E41 | TestPoint:TestPoint_Pad_D1.0mm | TP83 |
| 1 | E42 | TestPoint:TestPoint_Pad_D1.0mm | TP85 |
| 1 | E43 | TestPoint:TestPoint_Pad_D1.0mm | TP87 |
| 1 | E44 | TestPoint:TestPoint_Pad_D1.0mm | TP89 |
| 1 | E45 | TestPoint:TestPoint_Pad_D1.0mm | TP91 |
| 1 | E46 | TestPoint:TestPoint_Pad_D1.0mm | TP93 |
| 1 | E47 | TestPoint:TestPoint_Pad_D1.0mm | TP95 |
| 1 | E48 | TestPoint:TestPoint_Pad_D1.0mm | TP97 |
| 1 | E49 | TestPoint:TestPoint_Pad_D1.0mm | TP99 |
| 1 | E50 | TestPoint:TestPoint_Pad_D1.0mm | TP101 |
| 1 | E51 | TestPoint:TestPoint_Pad_D1.0mm | TP103 |
| 1 | E52 | TestPoint:TestPoint_Pad_D1.0mm | TP105 |
| 1 | E53 | TestPoint:TestPoint_Pad_D1.0mm | TP107 |
| 1 | E54 | TestPoint:TestPoint_Pad_D1.0mm | TP109 |
| 1 | E55 | TestPoint:TestPoint_Pad_D1.0mm | TP111 |
| 1 | E56 | TestPoint:TestPoint_Pad_D1.0mm | TP113 |
| 1 | E57 | TestPoint:TestPoint_Pad_D1.0mm | TP115 |
| 1 | E58 | TestPoint:TestPoint_Pad_D1.0mm | TP117 |
| 1 | E59 | TestPoint:TestPoint_Pad_D1.0mm | TP119 |
| 1 | E60 | TestPoint:TestPoint_Pad_D1.0mm | TP121 |
| 1 | E61 | TestPoint:TestPoint_Pad_D1.0mm | TP123 |
| 1 | E62 | TestPoint:TestPoint_Pad_D1.0mm | TP125 |
| 1 | E63 | TestPoint:TestPoint_Pad_D1.0mm | TP127 |
| 1 | E64 | TestPoint:TestPoint_Pad_D1.0mm | TP129 |
| 1 | E65 | TestPoint:TestPoint_Pad_D1.0mm | TP131 |
| 1 | E66 | TestPoint:TestPoint_Pad_D1.0mm | TP133 |
| 1 | E67 | TestPoint:TestPoint_Pad_D1.0mm | TP135 |
| 1 | E68 | TestPoint:TestPoint_Pad_D1.0mm | TP137 |
| 1 | E69 | TestPoint:TestPoint_Pad_D1.0mm | TP139 |
| 1 | E70 | TestPoint:TestPoint_Pad_D1.0mm | TP141 |
| 1 | E71 | TestPoint:TestPoint_Pad_D1.0mm | TP143 |
| 1 | E72 | TestPoint:TestPoint_Pad_D1.0mm | TP145 |
| 1 | E73 | TestPoint:TestPoint_Pad_D1.0mm | TP147 |
| 1 | E74 | TestPoint:TestPoint_Pad_D1.0mm | TP149 |
The 1,118 most common of 1,217 parts.
Similar boards
- 4 layers260 × 260 mm

- 2 layers367.5 × 124.2 mm

Platinum IIe keyboard
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
106 parts446 - 4 layers100 × 90 mm

Opentouch s3
JoeMighty/opentouch-s3
A modern remake of the Bare Conductive Touch Board: 12 capacitive touch electrodes, MP3/WAV/MIDI audio, and now WiFi, Bluetooth LE, USB-C, a proper LiPo power path, a fuel gauge, line-in, MIDI out, Qwiic and an RGB LED.
185 parts - 4 layers49.5 × 49.5 mm

- 2 layers66 × 88 mm

HotBed Mosfet
KaiJan57/mks-mosfet-reverse-engineered
A KiCad project made by looking very carefully at an mks mosfet
1,223 parts1 - 2 layers177.4 × 211.6 mm

3.5mm Jack breakout
SolderedElectronics/3.5mm-Jack-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for 3.5mm-Jack-breakout designed by Soldered Electronics.
1,228 parts - 2 layers216.6 × 190.2 mm

Breadboard power supply
SolderedElectronics/Breadboard-power-supply-board-hardware-design
Hardware design, BOM, gerbers and 3D files for Breadboard-power-supply-board designed by Soldered Electronics.
1,204 parts3 - 2 layers176.5 × 73.7 mm

S80 Breakout 7in
formix/S80
S80 stackable retro Z80 computer - Hardware, Software, Documentation
1,203 parts1
Questions
How big is the Geometric Electricity PCB?
It measures 150 × 130 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Geometric Electricity use?
1,217 parts, built around the E40, E15 and E11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Geometric Electricity KiCad files?
From the Grant-E-G/Geometric_Electricity repository on GitHub, at the commit this page was made from: the board is hardware/geometric_electricity.kicad_pcb and its schematic hardware/geometric_electricity.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Geometric Electricity design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).