

BMS based on LTC6813-1
- Size
- 100.3 × 102.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 125
- Nets
- 129
- Pads
- 581
- Tracks, vias
- 839, 0
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Mar 2021
- Updated
- 6 Mar 2021
Overview
BMS is an open-source printed circuit board by Gransi, from the Gransi/BMS-LTC6813 repository on GitHub. It is a 2-layer board of 100.3 × 102.9 mm with 125 parts on 129 nets, routed with 839 tracks and 0 vias.
It is built around the BSS308PE, IPT012N08N5 and BCP56. Its parts include 67 resistors, 23 capacitors, 22 transistors, 10 connectors and 3 ICs. It belongs with the power boards of this library.
Main components
3BSS308PE
SOT23-3-30V, -2A, P-Channel OptiMOS P3 Small-Signal-TransistorInfineon TechnologiesUncategorisedIPT012N08N5
HSOF-8-55℃~+175℃ 1 N-channel 1.2mΩ@10V 300A 375W 3V 80V N-Channel HSOF-8 MOSFETs ROHSInfineon TechnologiesMOSFETsBCP56
SOT-223-55℃~+150℃ 1 NPN 1.5W 100MHz 100nA 1A 250 500mV 5V 80V NPN SOT-223 Bipolar (BJT) ROHSHXY MOSFETBipolar (BJT)
Parts
125| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34 +4 |
| 20 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C23 +4 |
| 18 | 10 | Resistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18 +2 |
| 18 | 3k3 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R39, R40, R41, R42, R43, R44, R45, R46, R47, R48, R49, R50, R51, R52, R53, R54 +2 |
| 18 | BSS308PE | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18 +2 |
| 3 | 1µF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C20, C21, C22 |
| 3 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R61, R63, R67 |
| 3 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R60, R62, R66 |
| 3 | Conn_01x01_Male | TestPoint:TestPoint_Pad_4.0x4.0mm | J3, J8, J10 |
| 3 | IPT012N08N5 | Package_TO_SOT_SMD:Infineon_PG-HSOF-8-1 | Q19, Q21, Q22 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R58, R64 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R57, R59 |
| 2 | ACS758xCB-150B-PSS | Sensor_Current:Allegro_CB_PSS | U2, U3 |
| 2 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
| 1 | BCP56 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q20 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | LTC6813-1 | Package_QFP:LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm_ThermalVias | U1 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R65 |
Similar boards
- 4 layers14.8 × 14.8 mm

- 4 layers100 × 50 mm

- 4 layers135 × 70 mm

Bms c1
OpenConverters/Faraday
The living record of ABT #422 (closed 2026-08-01; this file is its successor — update it as boards land). The program: grow the open-source converter corpus, track (a) the derive success rate of the critical-mesh…
210 partsMIT - 2 layers149.2 × 83.7 mm

Nodo BMS 1 1
AugustoS97/BMS-BatterySystem
Repositorio con el diseño de un BMS y una batería como TFM
117 parts7GPL-3.0 - 2 layers101.6 × 114.3 mm

- 2 layers127 × 91.5 mm

Accumulator Board
formulaslug/fs-3-schematics
Electrical Design Repository for fs-3 schematics and PCBs
110 parts5 - 2 layers36 × 51 mm

Wifi sensor
KarlZeilhofer/WolkenThermometer-kicad
Schematic, Board Layout and Bill of Materials for the WolkenThermometer
59 parts1 - 4 layers162.6 × 53.3 mm

BMS peripheral
olin-electric-motorsports/MKIV-Boards
KiCad files for the boards on 2018-2019 car
132 parts1
Questions
How big is the BMS PCB?
It measures 100.3 × 102.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BMS use?
125 parts, built around the BSS308PE, IPT012N08N5 and BCP56. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMS KiCad files?
From the Gransi/BMS-LTC6813 repository on GitHub, at the commit this page was made from: the board is BMS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMS design in my own project?
Its repository states no licence, so its author keeps all rights: ask Gransi before reusing the design.